Ray, I am using non combined operation so it not necessary have limit. I am not sending a stop condition till the last byte is written or read. So if the xfer has more than the i2c buffer len we break up the transfers after the initial salve address write into max read/write data buffer size.
Thanks Kamal On Tue, May 19, 2015 at 4:50 PM, Ray Jui <[email protected]> wrote: > Hi Kamal, > > There's one change still missing (that I mentioned when reviewing v2 of the > patchset): > >>>> > What is the max len that can be supported? BSC_CNT_REG1_MASK = 63? Then > you should check against that. > > Note Wolfram has introduced a way to validate the supported data length > at the i2c-core, which you should adapt: > > commit b7f625840267b18ef1011cba0085bb7e237d76f7 > Author: Wolfram Sang <[email protected]> > Date: Mon Jan 5 23:45:59 2015 +0100 > > i2c: add quirk checks to core > > Let the core do the checks if HW quirks prevent a transfer. Saves code > from drivers and adds consistency. > <<< > > So you should add struct i2c_adapter_quirks and set the max_read_len and > max_write_len. > > I have no more comment for the rest of the code. > > Thanks, > > Ray > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
