On Mon, Aug 24, 2015 at 11:29:36AM +0530, Vaibhav Hiremath wrote: > TWSI_ILCR & TWSI_IWCR registers are used to adjust clock rate > of standard & fast mode in pxa910/988; so this patch adds these two new > entries to "struct pxa_reg_layout" and "struct pxa_i2c". > > As discussed in the previous patch-series, the idea here is to add standard > DT properties for ilcr and iwcr configuration fields. > In case of Master ilcr is used for low/high time and in case of slave mode > of operation iwcr is used for setup/hold time.
I need to rethink how to describe i2c bus timing parameters in DT in the
next days. But this is planned for 4.4., promised.
One thing I already wonder about this one...
> static const struct platform_device_id i2c_pxa_id_table[] = {
> { "pxa2xx-i2c", REGS_PXA2XX },
> { "pxa3xx-pwri2c", REGS_PXA3XX },
> { "ce4100-i2c", REGS_CE4100 },
> + { "pxa910-i2c", REGS_PXA910 },
> { },
You add a new platform_id...
> @@ -1135,7 +1170,7 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm
> = {
> static const struct of_device_id i2c_pxa_dt_ids[] = {
> { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
> { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
> - { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX },
> + { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
> {}
...but change the compatible binding instead of adding a new one?
signature.asc
Description: Digital signature
