From: Uwe Kleine-König <mailto:u.kleine-koe...@pengutronix.de> Sent: Friday, September 18, 2015 4:14 PM > To: Gao Pan-B54642 > Cc: w...@the-dreams.de; Li Frank-B20596; Duan Fugang-B38611; linux- > i...@vger.kernel.org; ker...@pengutronix.de; hkallwe...@gmail.com > Subject: Re: [Patch V7] i2c: imx: add runtime pm support to improve the > performance > > Hello, > > On Wed, Sep 09, 2015 at 10:12:19AM +0800, Gao Pan wrote: > > static irqreturn_t i2c_imx_isr(int irq, void *dev_id) @@ -894,6 > > +893,10 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, > > > > dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); > > > > + result = pm_runtime_get_sync(i2c_imx->adapter.dev.parent); > > + if (result < 0) > > + goto out; > > + > > /* Start I2C transfer */ > > result = i2c_imx_start(i2c_imx); > > if (result) > > @@ -950,6 +953,10 @@ fail0: > > /* Stop I2C transfer */ > > i2c_imx_stop(i2c_imx); > > > > +out: > > + pm_runtime_mark_last_busy(i2c_imx->adapter.dev.parent); > > + pm_runtime_put_autosuspend(i2c_imx->adapter.dev.parent); > > + > > I doubt that it's correct to call these two functions if > pm_runtime_get_sync failed. Shouldn't the out label be after the two > calls? Thanks, will change it in next version. > Other than that I assume you tested your patch with and without CONFIG_PM?
Thanks, I have tested the patch. The function is ok without CONFIG_PM. The patch uses clk_prepare_enable in the probe. Even if CONFIG_PM is disabled, it still can work. > Best regards > Uwe > > -- > Pengutronix e.K. | Uwe Kleine-König > | > Industrial Linux Solutions | http://www.pengutronix.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
