On Mon, 2015-10-12 at 13:46 +0300, Mika Westerberg wrote:
> On Fri, Oct 09, 2015 at 05:41:46PM -0700, Dustin Byford wrote:
> > An I2cSerialBus connection resource descriptor may indicate a
> > ResourceSource (a string uniquely identifying the I2C bus 
> > controller)
> > anywhere in the ACPI namespace.  However, when enumerating 
> > connections to a
> > I2C bus controller, i2c-core.c:acpi_i2c_register_devices() as only
> > searching devices that are descendants of the bus controller.
> > 
> > This change corrects acpi_i2c_register_devices() to walk the entire 
> > ACPI
> > namespace searching for I2C connections.
> > 
> > Suggested-by: Mika Westerberg <mika.westerb...@linux.intel.com>
> > Signed-off-by: Dustin Byford <dus...@cumulusnetworks.com>
> 
> This patch is already included in Andy's latest series adding support
> for Intel Galileo here:
> 
> https://patchwork.ozlabs.org/patch/527231/
> 
> Maybe we can add your Tested-by/Reviewed-by to that patch instead?

Indeed, the Tested-by tag would be much appreciated!

> 
> > ---
> >  drivers/i2c/i2c-core.c | 82 ++++++++++++++++++++++++++++++++++++--
> > ------------
> >  1 file changed, 59 insertions(+), 23 deletions(-)
> > 
> > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> > index 5f89f1e..3a4c54e 100644
> > --- a/drivers/i2c/i2c-core.c
> > +++ b/drivers/i2c/i2c-core.c
> > @@ -99,27 +99,40 @@ struct gsb_buffer {
> >     };
> >  } __packed;
> >  
> > -static int acpi_i2c_add_resource(struct acpi_resource *ares, void 
> > *data)
> > +struct acpi_i2c_lookup {
> > +   struct i2c_board_info *info;
> > +   acpi_handle adapter_handle;
> > +   acpi_handle device_handle;
> > +};
> > +
> > +static int acpi_i2c_find_address(struct acpi_resource *ares, void 
> > *data)
> >  {
> > -   struct i2c_board_info *info = data;
> > +   struct acpi_i2c_lookup *lookup = data;
> > +   struct i2c_board_info *info = lookup->info;
> > +   struct acpi_resource_i2c_serialbus *sb;
> > +   acpi_handle adapter_handle;
> > +   acpi_status status;
> >  
> > -   if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
> > -           struct acpi_resource_i2c_serialbus *sb;
> > +   if (info->addr || ares->type != 
> > ACPI_RESOURCE_TYPE_SERIAL_BUS)
> > +           return 1;
> >  
> > -           sb = &ares->data.i2c_serial_bus;
> > -           if (!info->addr && sb->type == 
> > ACPI_RESOURCE_SERIAL_TYPE_I2C) {
> > -                   info->addr = sb->slave_address;
> > -                   if (sb->access_mode == 
> > ACPI_I2C_10BIT_MODE)
> > -                           info->flags |= I2C_CLIENT_TEN;
> > -           }
> > -   } else if (!info->irq) {
> > -           struct resource r;
> > +   sb = &ares->data.i2c_serial_bus;
> > +   if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
> > +           return 1;
> >  
> > -           if (acpi_dev_resource_interrupt(ares, 0, &r))
> > -                   info->irq = r.start;
> > +   /*
> > +    * Extract the ResourceSource and make sure that the 
> > handle matches
> > +    * with the I2C adapter handle.
> > +    */
> > +   status = acpi_get_handle(lookup->device_handle,
> > +                            sb->resource_source.string_ptr,
> > +                            &adapter_handle);
> > +   if (ACPI_SUCCESS(status) && adapter_handle == lookup
> > ->adapter_handle) {
> > +           info->addr = sb->slave_address;
> > +           if (sb->access_mode == ACPI_I2C_10BIT_MODE)
> > +                   info->flags |= I2C_CLIENT_TEN;
> >     }
> >  
> > -   /* Tell the ACPI core to skip this resource */
> >     return 1;
> >  }
> >  
> > @@ -128,6 +141,8 @@ static acpi_status 
> > acpi_i2c_add_device(acpi_handle handle, u32 level,
> >  {
> >     struct i2c_adapter *adapter = data;
> >     struct list_head resource_list;
> > +   struct acpi_i2c_lookup lookup;
> > +   struct resource_entry *entry;
> >     struct i2c_board_info info;
> >     struct acpi_device *adev;
> >     int ret;
> > @@ -140,14 +155,37 @@ static acpi_status 
> > acpi_i2c_add_device(acpi_handle handle, u32 level,
> >     memset(&info, 0, sizeof(info));
> >     info.fwnode = acpi_fwnode_handle(adev);
> >  
> > +   memset(&lookup, 0, sizeof(lookup));
> > +   lookup.adapter_handle = ACPI_HANDLE(adapter->dev.parent);
> > +   lookup.device_handle = handle;
> > +   lookup.info = &info;
> > +
> > +   /*
> > +    * Look up for I2cSerialBus resource with ResourceSource 
> > that
> > +    * matches with this adapter.
> > +    */
> >     INIT_LIST_HEAD(&resource_list);
> >     ret = acpi_dev_get_resources(adev, &resource_list,
> > -                                acpi_i2c_add_resource, 
> > &info);
> > +                                acpi_i2c_find_address, 
> > &lookup);
> >     acpi_dev_free_resource_list(&resource_list);
> >  
> >     if (ret < 0 || !info.addr)
> >             return AE_OK;
> >  
> > +   /* Then fill IRQ number if any */
> > +   ret = acpi_dev_get_resources(adev, &resource_list, NULL, 
> > NULL);
> > +   if (ret < 0)
> > +           return AE_OK;
> > +
> > +   resource_list_for_each_entry(entry, &resource_list) {
> > +           if (resource_type(entry->res) == IORESOURCE_IRQ) {
> > +                   info.irq = entry->res->start;
> > +                   break;
> > +           }
> > +   }
> > +
> > +   acpi_dev_free_resource_list(&resource_list);
> > +
> >     adev->power.flags.ignore_parent = true;
> >     strlcpy(info.type, dev_name(&adev->dev), 
> > sizeof(info.type));
> >     if (!i2c_new_device(adapter, &info)) {
> > @@ -160,6 +198,8 @@ static acpi_status 
> > acpi_i2c_add_device(acpi_handle handle, u32 level,
> >     return AE_OK;
> >  }
> >  
> > +#define ACPI_I2C_MAX_SCAN_DEPTH 32
> > +
> >  /**
> >   * acpi_i2c_register_devices - enumerate I2C slave devices behind 
> > adapter
> >   * @adap: pointer to adapter
> > @@ -170,17 +210,13 @@ static acpi_status 
> > acpi_i2c_add_device(acpi_handle handle, u32 level,
> >   */
> >  static void acpi_i2c_register_devices(struct i2c_adapter *adap)
> >  {
> > -   acpi_handle handle;
> >     acpi_status status;
> >  
> > -   if (!adap->dev.parent)
> > -           return;
> > -
> > -   handle = ACPI_HANDLE(adap->dev.parent);
> > -   if (!handle)
> > +   if (!adap->dev.parent || !has_acpi_companion(adap
> > ->dev.parent))
> >             return;
> >  
> > -   status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
> > +   status = acpi_walk_namespace(ACPI_TYPE_DEVICE, 
> > ACPI_ROOT_OBJECT,
> > +                                ACPI_I2C_MAX_SCAN_DEPTH,
> >                                  acpi_i2c_add_device, NULL,
> >                                  adap, NULL);
> >     if (ACPI_FAILURE(status))

-- 
Andy Shevchenko <andriy.shevche...@linux.intel.com>
Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to