On Sat, Oct 24, 2015 at 05:32:29PM +0200, Rafael J. Wysocki wrote:
> CC: Mika
>
> On Thursday, October 22, 2015 01:05:42 PM Ben Gardner wrote:
> > Hi all,
> >
> > I have a custom Baytrail board with a M24C02 EEPROM attached to I2C bus 3.
> > I am using coreboot/SeaBIOS, so I have complete control over the ACPI
> > tables.
> > I am using Linux 4.2.3.
> >
> > I have defined a EEPROM device on I2C3 using I2cSerialBus() and it
> > shows up as expected.
> >
> > Scope (\_SB.PCI0.I2C3) {
> > Device (EEP0) {
> > Name (_CID, Package() { "24c02" })
> > Name (_CRS, ResourceTemplate () {
> > I2cSerialBus (0x0057, ControllerInitiated, 400000,
> > AddressingMode7Bit, "\\_SB.PCI0.I2C3", 0x00,
> > ResourceConsumer,,)
> > })
> > }
> > }
This is being discussed in another thread:
http://marc.info/?l=linux-acpi&m=144562104914442&w=2
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
