[PATCH v2 3/5] i2c-piix4: Request base address index region once for SB800

[Christian Fetzer]

Request the SMBus base address index region once in piix4_probe. This
is particularly useful when using the multiplexed adapter in SB800 as
it avoids requesting and releasing the region on every transfer.

Signed-off-by: Christian Fetzer <fetzer...@gmail.com>
---
 drivers/i2c/busses/i2c-piix4.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 35eeb0d..d866b58 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -125,6 +125,9 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
        { },
 };
 
+/* SB800 globals */
+static unsigned short piix4_smb_idx_sb800;
+
 struct i2c_piix4_adapdata {
        unsigned short smba;
 };
@@ -232,7 +235,6 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
                             const struct pci_device_id *id, u8 aux)
 {
        unsigned short piix4_smba;
-       unsigned short smba_idx = 0xcd6;
        u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status;
        u8 i2ccfg, i2ccfg_offset = 0x10;
 
@@ -254,16 +256,10 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
        else
                smb_en = (aux) ? 0x28 : 0x2c;
 
-       if (!request_region(smba_idx, 2, "smba_idx")) {
-               dev_err(&PIIX4_dev->dev, "SMBus base address index region "
-                       "0x%x already in use!\n", smba_idx);
-               return -EBUSY;
-       }
-       outb_p(smb_en, smba_idx);
-       smba_en_lo = inb_p(smba_idx + 1);
-       outb_p(smb_en + 1, smba_idx);
-       smba_en_hi = inb_p(smba_idx + 1);
-       release_region(smba_idx, 2);
+       outb_p(smb_en, piix4_smb_idx_sb800);
+       smba_en_lo = inb_p(piix4_smb_idx_sb800 + 1);
+       outb_p(smb_en + 1, piix4_smb_idx_sb800);
+       smba_en_hi = inb_p(piix4_smb_idx_sb800 + 1);
 
        if (!smb_en) {
                smb_en_status = smba_en_lo & 0x10;
@@ -616,16 +612,26 @@ static int piix4_add_adapter(struct pci_dev *dev, 
unsigned short smba,
 
 static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+       unsigned short smba_idx = 0xcd6;
        int retval;
 
        if ((dev->vendor == PCI_VENDOR_ID_ATI &&
             dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
             dev->revision >= 0x40) ||
-           dev->vendor == PCI_VENDOR_ID_AMD)
+           dev->vendor == PCI_VENDOR_ID_AMD) {
+
+               if (!request_region(smba_idx, 2, "smba_idx")) {
+                       dev_err(&dev->dev, "SMBus base address index region "
+                               "0x%x already in use!\n", smba_idx);
+                       return -EBUSY;
+               }
+               piix4_smb_idx_sb800 = smba_idx;
+
                /* base address location etc changed in SB800 */
                retval = piix4_setup_sb800(dev, id, 0);
-       else
+       } else {
                retval = piix4_setup(dev, id);
+       }
 
        /* If no main SMBus found, give up */
        if (retval < 0)
@@ -692,6 +698,9 @@ static void piix4_remove(struct pci_dev *dev)
                piix4_adap_remove(piix4_aux_adapter, 1);
                piix4_aux_adapter = NULL;
        }
+
+       if (piix4_smb_idx_sb800)
+               release_region(piix4_smb_idx_sb800, 2);
 }
 
 static struct pci_driver piix4_driver = {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html