> -----Original Message----- > From: Wolfram Sang [mailto:w...@the-dreams.de] > Sent: Sunday, December 13, 2015 1:03 AM > To: Yu, Xiangliang > Cc: andriy.shevche...@linux.intel.com; jarkko.nik...@linux.intel.com; > mika.westerb...@linux.intel.com; linux-i2c@vger.kernel.org; linux- > ker...@vger.kernel.org; SPG_Linux_Kernel > Subject: Re: [PATCH v2] I2C: designware: fix IO timeout issue for AMD > controller > > On Fri, Dec 11, 2015 at 08:02:53PM +0800, Xiangliang Yu wrote: > > Because of some hardware limitation, AMD I2C controller can't trigger > > pending interrupt if interrupt status has been changed after clearing > > interrupt status bits. Then, I2C will lost interrupt and IO timeout. > > > > According to hardware design, this patch implements a workaround to > > disable i2c controller interrupt and re-enable i2c interrupt before > > exiting ISR. > > > > To reduce the performance impacts on other vendors, use unlikely > > function to check flag in ISR. > > --- > > Don't manually add "---". This breaks a lot of workflow scripts. > "Patchwork" missed your Signed-off, for example! Sorry for my mistake.
> > Changes in v2: > > - pass flags with ->driver_data > > - unmask interrupt right after masking > > This paragraph... > > > > > Signed-off-by: Xiangliang Yu <xiangliang...@amd.com> > > --- > > ... needs to go here. > > However, I fixed it this time and applied to for-current, thanks! Thank you very much! -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
