On Wed, Dec 16, 2015 at 08:11:12AM -0600, Suravee Suthikulpanit wrote:
> >The clk framework should work fine if the returned clock is NULL (which
> >I think is your case).
> >
> >The driver gates clocks when the device is suspended and on Intel LPSS
> >there actually is a clock that gets gated.
> >
> >>[..]
> >>@@ -203,13 +223,11 @@ static int dw_i2c_plat_probe(struct platform_device 
> >>*pdev)
> >>            dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
> >>                    DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
> >>
> >>-   dev->clk = devm_clk_get(&pdev->dev, NULL);
> >>-   dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
> >>-   if (IS_ERR(dev->clk))
> >>-           return PTR_ERR(dev->clk);
> Actually, if we don't provide the clock (which is the case for ACPI), this
> would also return and cause the probing to fail.

Indeed it seems that when you have CONFIG_COMMON_CLK selected the clock
framework starts returning errors if the clock is not found.

Since we need the clock for Intel LPSS I2C host controllers (and they
may have *CNT methods), I think you just need to provide the clock for
AMD I2C host controller in similar way than we do in
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to