On 01/06/2016 06:31 PM, Loc Ho wrote:
The current driver uses input clock source frequency to calculate
values for [SS|FS]_[HC|LC] registers. However, when booting ACPI, we do not
currently have a good way to provide the frequency information.
Instead, we can leverage the SSCN and FFCN ACPI methods, which can be used
to directly provide these values. So, the clock information should
no longer be required during probing.
However, since clk can be invalid, additional checks must be done where
we are making use of it.
Signed-off-by: Mika Westerberg <mika.westerb...@linux.intel.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpa...@amd.com>
Tested-by: Loc Ho <l...@apm.com>
Note: This has been tested on AMD Seattle RevB for both DT and ACPI.
Changes from V3 (https://lkml.org/lkml/2015/12/22/596):
* Add i2c_dw_plat_prepare_clk() per Andy's suggestion
* Add tested-by Loc Ho.
The changes from V3 are big enough that I'd appreciate a new Tested-by
I had tested this via this mixes of test cases:
a. NO APD driver + this patch ==> HCNT/LCNT as expected
b. with APD driver + this patch ==> HCNT/LCNT as expected
c. with APD driver + this patch + double the frequency APD driver ==>
HCNT/LCNT as expected
d. with APD driver + this patch + double the frequency APD driver +
comment out the ACPI parameter retrieve ==> HCNT/LCNT changed as
Therefore, you can add my - Tested-by: Loc Ho <l...@apm.com>
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html