Hi Linus,
please do a
bk pull http://lia64.bkbits.net/linux-ia64-release-2.6.11
This will update the files shown below. Almost all of this has been
in my "test" tree for a while (and thus in "-mm").
I have one tiny generic change in here ... define a function "idle_task"
in kernel/sched.c (and declare it in sched.h) that is part of Keith Owens'
TIF_SIGDELAYED patch that ia64 uses in machine check processing to defer
the sending of a signal from the exception code (where we cannot safely
touch kernel structures) to the next return to userland.
Thanks!
-Tony
include/asm-ia64/sn/router.h | 618 ------------------
arch/ia64/Kconfig | 11
arch/ia64/kernel/asm-offsets.c | 11
arch/ia64/kernel/efi.c | 180 +++--
arch/ia64/kernel/entry.S | 15
arch/ia64/kernel/irq.c | 986 ------------------------------
arch/ia64/kernel/irq_ia64.c | 2
arch/ia64/kernel/mca.c | 18
arch/ia64/kernel/mca_asm.S | 65 -
arch/ia64/kernel/minstate.h | 7
arch/ia64/kernel/salinfo.c | 20
arch/ia64/kernel/setup.c | 3
arch/ia64/kernel/signal.c | 101 +++
arch/ia64/kernel/time.c | 2
arch/ia64/lib/swiotlb.c | 4
arch/ia64/mm/contig.c | 12
arch/ia64/mm/discontig.c | 75 +-
arch/ia64/mm/init.c | 65 +
arch/ia64/sn/kernel/iomv.c | 21
arch/ia64/sn/kernel/irq.c | 4
arch/ia64/sn/kernel/setup.c | 55 +
arch/ia64/sn/kernel/sn2/ptc_deadlock.S | 24
arch/ia64/sn/kernel/sn2/sn2_smp.c | 98 +-
arch/ia64/sn/kernel/sn2/timer.c | 5
arch/ia64/sn/kernel/sn2/timer_interrupt.c | 1
include/asm-ia64/hardirq.h | 2
include/asm-ia64/hw_irq.h | 4
include/asm-ia64/kregs.h | 1
include/asm-ia64/mca.h | 36 -
include/asm-ia64/mca_asm.h | 35 +
include/asm-ia64/msi.h | 1
include/asm-ia64/percpu.h | 2
include/asm-ia64/processor.h | 4
include/asm-ia64/sal.h | 4
include/asm-ia64/signal.h | 2
include/asm-ia64/sn/addrs.h | 387 ++++-------
include/asm-ia64/sn/arch.h | 3
include/asm-ia64/sn/klconfig.h | 2
include/asm-ia64/sn/leds.h | 1
include/asm-ia64/sn/nodepda.h | 2
include/asm-ia64/sn/pda.h | 13
include/asm-ia64/sn/rw_mmr.h | 9
include/asm-ia64/sn/shub_mmr.h | 221 +++---
include/asm-ia64/sn/sn_cpuid.h | 5
include/asm-ia64/sn/sn_sal.h | 53 +
include/asm-ia64/thread_info.h | 18
include/linux/sched.h | 1
kernel/sched.c | 9
48 files changed, 1007 insertions(+), 2211 deletions(-)
through these ChangeSets:
<[EMAIL PROTECTED]> (05/01/18 1.1984)
[IA64] contig.c save physical address of MCA save area
Ashok Raj uncovered a problem while testing the MCA code
on a tiger box with contig memory. The virtual address
was getting saved instead of the physical address of the
MCA save area. This patch fixes that problem.
Signed-off-by: Russ Anderson <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/01/14 1.1975.48.1)
[IA64/X86_64] swiotlb.c: fix gcc printk warning
swiotlb: Fix gcc printk format warning on x86_64, OK for ia64:
arch/ia64/lib/swiotlb.c:351: warning: long unsigned int format, long
long unsigned int arg (arg 2)
Signed-off-by: Randy Dunlap <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/01/11 1.1982)
[IA64-SGI] Delete unneeded SN2 header file router.h
Delete unused header file. The file became obsolete after the
IO reorg code was completed.
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/01/11 1.1981)
[IA64-SGI] Update SN2 code for running on simulator
Update the hack in sn_io_addr() that is used when running on the
system simulator. The change is needed for running on systems with
the new shub2 chipset.
Note that this change affects simulator runs only.
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/01/07 1.1980)
[IA64] correct PERCPU_MCA_SIZE and ia64_init_stack size
* PERCPU_MCA_SIZE was the size of the wrong structure.
* ia64_init_stack was larger than necessary.
Signed-off-by: Russ Anderson <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/01/07 1.1979)
[IA64] Use alloc_bootmem() to get the space for mca_data.
PERCPU_MCA_SIZE is not a power of two, so is unsuited to be used as the
'align'
argument to __alloc_bootmem(). In fact we don't need any special alignment
for
this structure, so we can use the simpler alloc_bootmem() macro interface to
the
allocator.
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/01/06 1.1978)
[IA64] Fix problems in per cpu MCA code.
* K.3 was not getting set on all cpus.
* The pointer to each cpu's mca save area was getting incremented
before being set, with the result that the last cpu's pointer
was wrong.
* Made contig.c changes corresponding to earlier discontig.c changes.
* An offset into cpuinfo_ia64 structure was wrong in mca_asm.S.
Special thanks to Keith Owens for helping test and identify problems.
Signed-off-by: Russ Anderson <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (05/01/06 1.1977)
[IA64] Stagger the addresses of the pernode data structures to minimize
cache aliasing.
Allocation of pernode structures in find_pernode_space() does not
properly stagger the alignment of the pgdats. This causes
aliasing of the structures in the L3 caches, ie. the same fields
in pgdat structures for multiple nodes will index to same cache
index in the L3.
If a process is allocating a huge amount of space & many nodes must
be scanned before finding a node with available space, allocation
of a pages is significantly slowed by excessive cache misses.
By properly staggering the locations of the pgdat structures, allocation
times on insanely large systems is dramatically improved. On a 256 node
512GB system, allocation of 450 GB by a single process was reduced
from 1510 sec to 220 sec - a 7X improvement.
Aside from wasting a trivial amount of space, I don't see any
downside to staggering the allocation by 1 cacheline per node.
wasted space
bytes = N * (N-1) * 64
For 64 node system
wasted bytes = ~256K
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/13 1.1938.435.11)
[IA64] Drop SALINFO_TIMER_DELAY from 5 minutes to 1 minute
Experience with recoverable MCA events shows that a poll interval of 5
minutes for new MCA/INIT records is a bit too long. Drop the poll
interval to one minute.
Signed-off-by: Keith Owens <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/13 1.1938.435.10)
[IA64] Clear all corrected records as they occur
Because MCA events are not irq safe, they cannot be logged via
salinfo_decode at the time that they occur. Instead kernel salinfo.c
runs a timer every few minutes to check for and to clear corrected MCA
records. If a second recoverable MCA occurs on the same cpu before
salinfo_decode has cleared the first record then OS_MCA reads the
record for the first MCA from SAL, which passes invalid data to the MCA
recovery routines.
This patch treats all corrected records the same way, by clearing the
records from SAL as soon as they occur. CMC and CPE records are
cleared as they are read. Recoverable MCA records are cleared at the
time that we decide they can be corrected. If salinfo_decode is not
running or is backlogged then we lose some logging, but that has always
been the case for corrected errors.
Signed-off-by: Keith Owens <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/13 1.1938.435.9)
[IA64] Add TIF_SIGDELAYED, delay a signal until it is safe
Some of the work on recoverable MCA events has a requirement to send a
signal to a user process. But it is not safe to send signals from
MCA/INIT/NMI/PMI, because the rest of the kernel is an unknown state.
This patch adds set_sigdelayed() which is called from the problem
contexts to set the delayed signal. The delayed signal will be
delivered from the right context on the next transition from kernel to
user space.
If TIF_SIGDELAYED is set when we run ia64_leave_kernel or
ia64_leave_syscall then the delayed signal is delivered and cleared.
All code for sigdelayed processing is on the slow paths.
A recoverable MCA handler that wants to kill a user task just does
set_sigdelayed(pid, signo, code, addr);
Signed-off-by: Keith Owens <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/10 1.1938.435.8)
[IA64] hardirq.h: Add declaration for ack_bad_irq().
Cleanup a warning from my irq merge.
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/10 1.1938.435.7)
[IA64] per cpu MCA/INIT save areas
Linux currently has one MCA & INIT save area for saving
stack and other data. This patch creates per cpu MCA
save areas, so that each cpu can save its own MCA stack
data. CPU register ar.k3 is used to hold a physical
address pointer to the cpuinfo structure. The cpuinfo
structure has a physical address pointer to the MCA save
area. The MCA handler runs in physical mode and the
physical address pointer avoids the problems associated
with doing the virtual to physical translation.
The per MCA save areas replace the global areas defined
in arch/ia64/kernel/mca.c for MCA processor state dump,
MCA stack, MCA stack frame, and MCA bspstore.
The code to access those save areas is updated to use the
per cpu save areas.
No changes are made to the MCA flow, ie all the old locks
are still in place. The point of this patch is to establish
the per cpu save areas. Additional usage of the save areas,
such as enabling concurrent INIT or MCA handling, will be
the subject of other patches.
Signed-off-by: Russ Anderson <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/10 1.1938.435.6)
[IA64] Cachealign jiffies_64 to prevent unexpected aliasing in the caches.
On large systems, system overhead on cpu 0 is higher than on other
cpus. On a completely idle 512p system, the average amount of system time
on cpu 0 is 2.4% and .15% on cpu 1-511.
A second interesting data point is that if I run a busy-loop
program on cpus 1-511, the system overhead on cpu 0 drops
significantly.
I moved the timekeeper to cpu 1. The excessive system time moved
to cpu 1 and the system time on cpu 0 dropped to .2%.
Further investigation showed that the problem was caused by false
sharing of the cacheline containing jiffies_64. On the kernel that
I was running, both jiffies_64 & pal_halt share the same cacheline.
Idle cpus are frequently accessing pal_halt. Minor kernel
changes (including some of the debugging code that I used to find the
problem :-( ) can cause variables to move & change the false sharing - the
symptoms of the problem can change or disappear.
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/10 1.1938.435.4)
[IA64-SGI] Add support for a future SGI chipset (shub2) 4of4
Change the code that manages the LEDs so that it
works on both shub1 & shub2.
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/10 1.1938.435.3)
[IA64-SGI] Add support for a future SGI chipset (shub2) 3of4
Change the IPI & TLB flushing code so that it works on
both shub1 & shub2.
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/10 1.1938.435.2)
[IA64-SGI] Add support for a future SGI chipset (shub2) 2of4
This patch adds the addresses of shub2 MMRS to the shub_mmr
header file. During boot, a SAL call is made to determine the
type of the shub. Platform initialization sets the appropriate
MMR addresses for the platform.
A new macro (is_shub1() & is_shub2()) can be used at runtime to
determine the type of the shub.
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/12/10 1.1938.435.1)
[IA64-SGI] Add support for a future SGI chipset (shub2) 1of4
This patch changes the SN macros for calulating the addresses
of shub MMRs. Functionally, shub1 (current chipset) and shub2
are very similar. The primary differences are in the addresses
of MMRs and in the location of the NASID (node number) in
a physical address. This patch adds the basic infrastructure
for running a single binary kernel image on either shub1 or shub2.
Signed-off-by: Jack Steiner <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]> (04/11/23 1.1938.391.1)
[IA64] convert to use CONFIG_GENERIC_HARDIRQS
Convert ia64 to use generic irq handling code.
sn2 fixes and testing by Jesse Barnes
Signed-off-by: Tony Luck <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
