I'm working to build a linux kernel module for a PCI card to run on SGI
Altix IA-64
I'm using Kernel 2.6.5-7.145-rt IA-64
I have read the Linux Device Driver Programmers's - Guide - Porting to
SGI Altix Systems, 007-4520-005
I'm using a Linux software package from PLX version 4.4 for linux 2.6
http://www.plxtech.com/products/tools/software/default.asp
I load the module in the kernel
In the user side, I have a program to open the device, map the device
My problem actually is that I can not access the Bar[2] address in my
user program after mapped this Bar in my user memory, the PCI Bar[2] memory region
This is what I'm doing to map the memory :
1- In the kernel module, the function pci_ressource_start return an
address for Bar[2] : 0xc00000080fa00000
I can access these address in the kernel and print data or whatever.
The real physical address in the Bar[2] is 0x400000 but I read in the
SGI manual that I can not use these address.
2- My user program ask the Linux Kernel Module to map these Bar[2] in
the user memory so the kernel return a user address 0x2000000000500000
mapped for the user program
You can see the output in the kernel Mapped Physical address
0xc00000080fa00000 ==> User space 0x2000000000500000
3- When I try to access (RD) these 0x2000000000500000 address, the Altix is
not responding!
The module support IOCTL calls and works very good
So this is my problem!
Thank you for your help!
Regards
This is my PCI register
-------------------------------------------------------------------------
PCI Registers:
0x000: 40713c5 Device ID|Vendor ID
0x004: 2800007 Status|Command
0x008: ff000000 Base Class|Sub Class|Interface|Revision ID
0x00c: 2000 BIST|Header Type|Latency Timer|Cache Line Size
0x010: 200000 PCI Base Address 0 for Memory Mapped Runtime Regs
0x014: 200001 PCI Base Address 1 for I/O Mapped Runtime Regs
0x018: 400000 PCI Base Address 2 for Local Address Space 0
0x01c: 1000000 PCI Base Address 3 for Local Address Space 1
0x020: 0 PCI Base Address 4 for Local Address Space 2
0x024: 0 PCI Base Address 5 for Local Address Space 3
0x028: 0 Cardbus CIS Pointer
0x02c: 40713c5 Subsystem ID|Subsystem Vendor ID
0x030: 0 PCI Base Address to Local Expansion ROM
0x034: 0 Reserved
0x038: 0 Reserved
0x03c: 13f Max_Lat|Min_Grant|Interrupt Pin|Interrupt Line
lspci -v
-------------------------------------------------------------------------
0000:02:02.0 Class ff00: Alphi Technology Corp: Unknown device 0407
Subsystem: Alphi Technology Corp: Unknown device 0407
Flags: bus master, medium devsel, latency 32, IRQ 63
Memory at c00000080fe00000 (32-bit, non-prefetchable) [size=32M]
I/O ports at c00000080fc00000 [size=256]
Memory at c00000080fa00000 (32-bit, non-prefetchable) [size=2M]
Memory at c0000008a1000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at 0000000000000800 [disabled]
printk output module
-------------------------------------------------------------------------
<7>Pci9080: Received message ==> OPEN_DEVICE
<7>Pci9080: Opening Management interface...
<7>Pci9080: ...device opened
PLX_IOCTL_PCI_DEVICE_FIND
<7>Pci9080: Received message ==> CLOSE_DEVICE
<7>Pci9080: Closing Management interface...
<7>Pci9080: ...device closed
<7>Pci9080: Received message ==> OPEN_DEVICE
<7>Pci9080: Opening Management interface...
<7>Pci9080: ...device opened
PLX_IOCTL_PCI_DEVICE_FIND
<7>Pci9080: Received message ==> CLOSE_DEVICE
<7>Pci9080: Closing Management interface...
<7>Pci9080: ...device closed
<7>Pci9080: Received message ==> OPEN_DEVICE
<7>Pci9080: Opening Management interface...
<7>Pci9080: ...device opened
PLX_IOCTL_PCI_DEVICE_FIND
<7>Pci9080: Received message ==> CLOSE_DEVICE
<7>Pci9080: Closing Management interface...
<7>Pci9080: ...device closed
<7>Pci9080: Received message ==> OPEN_DEVICE
<7>Pci9080: Opening device (Pci9080-0)...
<7>Pci9080: Dispatch spin_lock...
<7>Pci9080: StartDevice
<7>Pci9080: Resource 00
<7>Pci9080: Physical.QuadPart : c00000080fe00000
<7>Pci9080: Type : Memory Space
<7>Pci9080: Address : c00000080fe00000
<7>Pci9080: Size : 100 (256 bytes)
<7>Pci9080: PCI BAR : 0
<7>Pci9080: Request memory region
<7>Pci9080: Get a kernel-mapped virtual address ioremap
<7>Pci9080: Kernel VA: c00000080fe00000
<7>Pci9080: Resource 01
<7>Pci9080: Physical.QuadPart : c00000080fc00000
<7>Pci9080: Type : I/O Port
<7>Pci9080: Address : c00000080fc00000
<7>Pci9080: Size : 100 (256 bytes)
<7>Pci9080: PCI BAR : 1
<7>Pci9080: Request I/O port region
<7>Pci9080: Resource 02
<7>Pci9080: Physical.QuadPart : c00000080fa00000
<7>Pci9080: Physical Bar 2[0] = 0
<7>Pci9080: Physical Bar 2[4] = 0
<7>Pci9080: Physical Bar 2[8] = 0
<7>Pci9080: Physical Bar 2[12] = 0
<7>Pci9080: Physical Bar 2[16] = 0
<7>Pci9080: Physical Bar 2[20] = 0
<7>Pci9080: Physical Bar 2[24] = 0
<7>Pci9080: Physical Bar 2[28] = 0
<7>Pci9080: Type : Memory Space
<7>Pci9080: Address : c00000080fa00000
<7>Pci9080: Size : 200000 (2048 Kb)
<7>Pci9080: PCI BAR : 2
<7>Pci9080: Request memory region
<7>Pci9080: Get a kernel-mapped virtual address ioremap
<7>Pci9080: Kernel VA: c00000080fa00000
<7>Pci9080: Resource 03
<7>Pci9080: Physical.QuadPart : c0000008a1000000
<7>Pci9080: Type : Memory Space
<7>Pci9080: Address : c0000008a1000000
<7>Pci9080: Size : 1000000 (16384 Kb)
<7>Pci9080: PCI BAR : 3
<7>Pci9080: Request memory region
<7>Pci9080: Get a kernel-mapped virtual address ioremap
<7>Pci9080: Kernel VA: c0000008a1000000
<7>Pci9080: Disable the PCI interrupt...
<7>Pci9080: ...device opened
PLX_IOCTL_DRIVER_VERSION
PLX_IOCTL_DEVICE_INIT
PLX_IOCTL_CHIP_TYPE_GET
PLX_IOCTL_PCI_BAR_RANGE_GET
PLX_IOCTL_PCI_BAR_GET
<7>Pci9080: Received message ===> MMAP
<7>Pci9080: Added map object (0x713bfc80) to list
<7>Pci9080: ...Completed message
PLX_IOCTL_PHYSICAL_MEM_MAP
<7>Pci9080: Found and removed map object (0xe0000030713bfc80) from list
<7>Pci9080: Plx_io_remap_page_range ...
<7>Pci9080: Mapped Physical address (0xc00000080fe00000) ==> User space
(0x2000000000400000)
PLX_IOCTL_PCI_BAR_RANGE_GET
PLX_IOCTL_PCI_BAR_GET
PLX_IOCTL_PCI_BAR_RANGE_GET
PLX_IOCTL_PCI_BAR_GET
<7>Pci9080: Received message ===> MMAP
<7>Pci9080: Added map object (0x713bfc80) to list
<7>Pci9080: ...Completed message
PLX_IOCTL_PHYSICAL_MEM_MAP
<7>Pci9080: Found and removed map object (0xe0000030713bfc80) from list
<7>Pci9080: Plx_io_remap_page_range ...
<7>Pci9080: Mapped Physical address (0xc00000080fa00000) ==> User space
(0x2000000000500000)
PLX_IOCTL_PCI_BAR_RANGE_GET
PLX_IOCTL_PCI_BAR_GET
<7>Pci9080: Received message ===> MMAP
<7>Pci9080: Added map object (0x713bfc80) to list
<7>Pci9080: ...Completed message
PLX_IOCTL_PHYSICAL_MEM_MAP
<7>Pci9080: Found and removed map object (0xe0000030713bfc80) from list
<7>Pci9080: Plx_io_remap_page_range ...
<7>Pci9080: Mapped Physical address (0xc0000008a1000000) ==> User space
(0x2000000000700000)
PLX_IOCTL_PCI_BAR_RANGE_GET
PLX_IOCTL_PCI_BAR_RANGE_GET
--
Francois Guay, ing.
Laboratoire Simulation de réseaux
Institut de Recherche d'Hydro-Québec (IREQ)
1800, boul. Lionel-Boule, Varennes, Québec, Canada, J3X 1S1
Tél.: 450-652-8367 | Fax: 450-652-8180
Email: [EMAIL PROTECTED]
Web: www.ireq.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
