On Thu, 16 Nov 2006 11:23:13 -0800
"Luck, Tony" <[EMAIL PROTECTED]> wrote:
> Some bit of infiniband is
> now also breaking allmodconfig, so it is not like this patch is the
> only thing stopping allmodconfig from working.
I sent the below to Linus yesterday - it should fix that.
From: "Bryan O'Sullivan" <[EMAIL PROTECTED]>
The PCI Express and Hypertransport chip-specific source files should only
be built when the kernel has the capability of actually compiling them.
This fixes the driver build on, for example, ia64.
Signed-off-by: Bryan O'Sullivan <[EMAIL PROTECTED]>
Cc: "Eric W. Biederman" <[EMAIL PROTECTED]>
Cc: Roland Dreier <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/infiniband/hw/ipath/Kconfig | 2 +-
drivers/infiniband/hw/ipath/Makefile | 5 +++--
drivers/infiniband/hw/ipath/ipath_driver.c | 4 ++++
3 files changed, 8 insertions(+), 3 deletions(-)
diff -puN
drivers/infiniband/hw/ipath/Kconfig~ib-ipath-fix-driver-build-for-platforms-with-pci-but-not-ht
drivers/infiniband/hw/ipath/Kconfig
---
a/drivers/infiniband/hw/ipath/Kconfig~ib-ipath-fix-driver-build-for-platforms-with-pci-but-not-ht
+++ a/drivers/infiniband/hw/ipath/Kconfig
@@ -1,6 +1,6 @@
config INFINIBAND_IPATH
tristate "QLogic InfiniPath Driver"
- depends on PCI_MSI && 64BIT && INFINIBAND
+ depends on (PCI_MSI || HT_IRQ) && 64BIT && INFINIBAND
---help---
This is a driver for QLogic InfiniPath host channel adapters,
including InfiniBand verbs support. This driver allows these
diff -puN
drivers/infiniband/hw/ipath/Makefile~ib-ipath-fix-driver-build-for-platforms-with-pci-but-not-ht
drivers/infiniband/hw/ipath/Makefile
---
a/drivers/infiniband/hw/ipath/Makefile~ib-ipath-fix-driver-build-for-platforms-with-pci-but-not-ht
+++ a/drivers/infiniband/hw/ipath/Makefile
@@ -10,8 +10,6 @@ ib_ipath-y := \
ipath_eeprom.o \
ipath_file_ops.o \
ipath_fs.o \
- ipath_iba6110.o \
- ipath_iba6120.o \
ipath_init_chip.o \
ipath_intr.o \
ipath_keys.o \
@@ -31,5 +29,8 @@ ib_ipath-y := \
ipath_verbs_mcast.o \
ipath_verbs.o
+ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
+ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o
+
ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
diff -puN
drivers/infiniband/hw/ipath/ipath_driver.c~ib-ipath-fix-driver-build-for-platforms-with-pci-but-not-ht
drivers/infiniband/hw/ipath/ipath_driver.c
---
a/drivers/infiniband/hw/ipath/ipath_driver.c~ib-ipath-fix-driver-build-for-platforms-with-pci-but-not-ht
+++ a/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -390,12 +390,16 @@ static int __devinit ipath_init_one(stru
/* setup the chip-specific functions, as early as possible. */
switch (ent->device) {
+#ifdef CONFIG_HT_IRQ
case PCI_DEVICE_ID_INFINIPATH_HT:
ipath_init_iba6110_funcs(dd);
break;
+#endif
+#ifdef CONFIG_PCI_MSI
case PCI_DEVICE_ID_INFINIPATH_PE800:
ipath_init_iba6120_funcs(dd);
break;
+#endif
default:
ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
"failing\n", ent->device);
_
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
