2007-08-02 (木) の 09:50 -0500 に Russ Anderson さんは書きました:
> There seems to be an issue with this for CPEs. The net result is
> when there is a correctable error, the interrupt does not get handled
> resulting in this message:
>
> -----------------------------------------------------------------
> irq 30, desc: a000000100c37000, depth: 1, count: 0, unhandled: 0
> ->handle_irq(): a0000001009a6a50, __end_rodata+0x5010/0x225c0
> ->chip(): a000000100dfee80, irq_type_sn+0x0/0x80
> ->action(): 0000000000000000
> IRQ_DISABLED set
> Unexpected irq vector 0x1e on CPU 0!
> -----------------------------------------------------------------
>
> The CPE handler should be on irq 0x1e (30). See IA64_CPE_VECTOR .
> In ia64_mca_late_init() the line
>
> if (irq_to_vector(irq) == cpe_vector) {
>
> is never true, so setup_irq(irq, &mca_cpe_irqaction); never gets called.
>
Could you please check if [PATCH 2/2] is applied on your kernel again?
With [PATCH 2/2], irq_to_vector(irq) just returns the same value as
vector. So the line
for (irq = 0; irq < NR_IRQS; ++irq)
if (irq_to_vector(irq) == cpe_vector) {
should be true if cpe_vector is within 0 to NR_IRQ-1.
I'm sorry but the important thing was missing in my "FYI".
I said like folows:
> The "irq == vector" is always true in the following cases:
> ...
> - Vectors outside FIRST_DEVICE_VECTOR to LAST_DEVICE_VECTOR
But if the irq is not initialized by __bind_irq_vector() through
bind_irq_vector() or register_percpu_irq(), irq_to_vector(irq) returns
IRQ_VECTOR_UNASSIGNED, which is zero.
So if [PATCH 2/2] was not applied, irq_to_vector(IA64_CPE_VECTOR)
may returns zero and "irq_to_vector(irq) == cpe_vector" would never
be true.
BTW, as you pointed out in the other mail, sn_irq_to_vector() will
truncate any IRQ > 255. Because of this, "if (irq_to_vector(irq) ==
cpe_vector)" check will true several times. But I don't know if
this is the cause of CPE problem, becasue CPE is still fine on my
dig64 kernel even when the following debug patch applied.
Thanks,
Kenji Kaneshige
---
arch/ia64/kernel/irq.c | 6 ++++--
include/asm-ia64/hw_irq.h | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
Index: linux-2.6.23-rc1/arch/ia64/kernel/irq.c
===================================================================
--- linux-2.6.23-rc1.orig/arch/ia64/kernel/irq.c
+++ linux-2.6.23-rc1/arch/ia64/kernel/irq.c
@@ -35,12 +35,14 @@ void ack_bad_irq(unsigned int irq)
#ifdef CONFIG_IA64_GENERIC
ia64_vector __ia64_irq_to_vector(int irq)
{
- return irq_cfg[irq].vector;
+ return (ia64_vector)irq;
+ //return irq_cfg[irq].vector;
}
unsigned int __ia64_local_vector_to_irq (ia64_vector vec)
{
- return __get_cpu_var(vector_irq)[vec];
+ return (unsigned int)vec;
+ //return __get_cpu_var(vector_irq)[vec];
}
#endif
Index: linux-2.6.23-rc1/include/asm-ia64/hw_irq.h
===================================================================
--- linux-2.6.23-rc1.orig/include/asm-ia64/hw_irq.h
+++ linux-2.6.23-rc1/include/asm-ia64/hw_irq.h
@@ -126,13 +126,15 @@ extern irq_desc_t irq_desc[NR_IRQS];
#ifndef CONFIG_IA64_GENERIC
static inline ia64_vector __ia64_irq_to_vector(int irq)
{
- return irq_cfg[irq].vector;
+ return (ia64_vector)irq;
+ //return irq_cfg[irq].vector;
}
static inline unsigned int
__ia64_local_vector_to_irq (ia64_vector vec)
{
- return __get_cpu_var(vector_irq)[vec];
+ return (unsigned int)vec;
+ //return __get_cpu_var(vector_irq)[vec];
}
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
