Mikael Pettersson wrote: > On Sun, 06 May 2007 16:35:11 +0200, Sven Lemke wrote: > >> sata_promise 0000:00:0b.0: version 2.05 >> ... >> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >> ata2.00: ATAPI, max UDMA/33 >> ata2.00: applying bridge limits >> ata2.00: configured for UDMA/33 >> sd 0:0:0:0: [sda] Attached SCSI disk >> sd 0:0:0:0: Attached scsi generic sg0 type 0 >> scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 >> ... >> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >> ata2.00: (port_status 0x20200000) >> ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 >> res 40/00:02:00:60:00/00:00:00:00:00/a0 Emask 0x5 (timeout) > etc > > Probably fallout from a mistake I made in the error decoding update. > Apply the patch below, try again, and let us know if it works or not. > > /Mikael > > --- linux-2.6.21-mm1/drivers/ata/sata_promise.c.~1~ 2007-05-05 > 22:24:41.000000000 +0200 > +++ linux-2.6.21-mm1/drivers/ata/sata_promise.c 2007-05-05 > 22:25:21.000000000 +0200 > @@ -653,6 +653,8 @@ static void pdc_error_intr(struct ata_po > qc->err_mask |= ac_err_mask; > > pdc_reset_port(ap); > + > + ata_port_abort(ap); > } > > static inline unsigned int pdc_host_intr( struct ata_port *ap, > This solves the problem. Great job!!
dmesg: ... ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI, max UDMA/33 ata2.00: applying bridge limits ata2.00: configured for UDMA/33 ... scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5 ... sr 1:0:0:0: Attached scsi CD-ROM sr0 ... Thanks a lot, Sven - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
