On Fri, 25 May 2007 19:16:58 +0200
Tejun Heo <[EMAIL PROTECTED]> wrote:
> Fix various bugs in pio/mwdma mode programming.
>
> * Control bits in the timing register wasn't cleared properly while
> programming PIO mode.
>
> * MWDMA mode programming cleared the wrong part of control bits.
>
> * MWDMA mode programming cleared udma_mask even when the controller
> doesn't support UDMA.
>
> Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
> Cc: Art Haas <[EMAIL PROTECTED]>
Acked-by: Alan Cox <[EMAIL PROTECTED]>
> ---
> Patch is against libata-dev#upstream. Thanks.
>
> drivers/ata/ata_piix.c | 23 +++++++++++++++++------
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
> index 9c07b88..924e447 100644
> --- a/drivers/ata/ata_piix.c
> +++ b/drivers/ata/ata_piix.c
> @@ -685,8 +685,14 @@ static void piix_set_piomode (struct ata
> if (adev->class == ATA_DEV_ATA)
> control |= 4; /* PPE enable */
>
> + /* PIO configuration clears DTE unconditionally. It will be
> + * programmed in set_dmamode which is guaranteed to be called
> + * after set_piomode if any DMA mode is available.
> + */
> pci_read_config_word(dev, master_port, &master_data);
> if (is_slave) {
> + /* clear TIME1|IE1|PPE1|DTE1 */
> + master_data &= 0xff0f;
> /* Enable SITRE (seperate slave timing register) */
> master_data |= 0x4000;
> /* enable PPE1, IE1 and TIME1 as needed */
> @@ -694,12 +700,14 @@ static void piix_set_piomode (struct ata
> pci_read_config_byte(dev, slave_port, &slave_data);
> slave_data &= (ap->port_no ? 0x0f : 0xf0);
> /* Load the timing nibble for this slave */
> - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
> (ap->port_no ? 4 : 0);
> + slave_data |= ((timings[pio][0] << 2) | timings[pio][1])
> + << (ap->port_no ? 4 : 0);
> } else {
> - /* Master keeps the bits in a different format */
> - master_data &= 0xccf8;
> + /* clear ISP|RCT|TIME0|IE0|PPE0|DTE0 */
> + master_data &= 0xccf0;
> /* Enable PPE, IE and TIME as appropriate */
> master_data |= control;
> + /* load ISP and RCT */
> master_data |=
> (timings[pio][0] << 12) |
> (timings[pio][1] << 8);
> @@ -816,7 +824,7 @@ static void do_pata_set_dmamode (struct
> master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY
> */
> master_data |= control << 4;
> pci_read_config_byte(dev, 0x44, &slave_data);
> - slave_data &= (0x0F + 0xE1 * ap->port_no);
> + slave_data &= (ap->port_no ? 0x0f : 0xf0);
> /* Load the matching timing */
> slave_data |= ((timings[pio][0] << 2) |
> timings[pio][1]) << (ap->port_no ? 4 : 0);
> pci_write_config_byte(dev, 0x44, slave_data);
> @@ -828,8 +836,11 @@ static void do_pata_set_dmamode (struct
> (timings[pio][0] << 12) |
> (timings[pio][1] << 8);
> }
> - udma_enable &= ~(1 << devid);
> - pci_write_config_word(dev, master_port, master_data);
> +
> + if (ap->udma_mask) {
> + udma_enable &= ~(1 << devid);
> + pci_write_config_word(dev, master_port, master_data);
> + }
> }
> /* Don't scribble on 0x48 if the controller does not support UDMA */
> if (ap->udma_mask)
--
--
Sick of rip off UK rail fares ? Learn how to get far cheaper fares
http://zeniv.linux.org.uk/~alan/GTR/
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
