On Monday 09 July 2007, Sergei Shtylyov wrote:
> Hello.
>
> Bartlomiej Zolnierkiewicz wrote:
> > * Fix icside, cris-ide, au1xxx-ide, amd74xx, via82cxxx and pmac host drivers
> > to use ide_rate_filter().
>
> > This results in the following modes (from user requests) being clipped
> > down:
> > - invalid modes (values 0x46-0xFF) [ for all hosts ]
> > - unsupported by a host UDMA modes [ for hosts which support UDMA]
> > - all UDMA modes and MWDMA3-4 modes [ for hosts which doesn't support
> > UDMA ]
> > - invalid modes (values 0x25-0x39) [ for hosts which doesn't support
> > UDMA ]
>
> For plural 3rd person it would be "don't". ;-)
> Sorry for the grammar nitpicking
Fixed, thanks.
> > * Host driver specific changes in behavior:
>
> > icside:
> > - no change
>
> > cris-ide
> > - clip unsupported UDMA3-6 modes down
> > - fix BUG() on trying to set unsupported UDMA3-6 modes
>
> > au1xxx-ide/pmac
> > - clip unsupported UDMA modes down
>
> > amd74xx/via82cxxx
> > - clip unsupported UDMA modes down
> > - fix random PIO timings being set for unsupported/invalid modes
> > - fix unsupported/invalid modes being set on the device
>
> > * While at it remove no longer needed checks from pmac.c driver.
>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
>
> Acked-by: Sergei Shtylyov <[EMAIL PROTECTED]>
added
> > ---
> > This patch series goes before ide-add-ide-set-pio-take3.patch patch
> > ("[PATCH] ide: add ide_set{_max}_pio() (take 3)") in the quilt tree.
> > The rediffed ide-add-ide-set-pio-take3.patch is also included for
> > completness.
>
> > Index: b/drivers/ide/ppc/pmac.c
> > ===================================================================
> > --- a/drivers/ide/ppc/pmac.c
> > +++ b/drivers/ide/ppc/pmac.c
> > @@ -923,6 +923,8 @@ pmac_ide_tune_chipset (ide_drive_t *driv
> > pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data;
> > u32 *timings, *timings2;
> >
> > + speed = ide_rate_filter(drive, speed);
> > +
> > if (pmif == NULL)
> > return 1;
> >
> > @@ -932,17 +934,9 @@ pmac_ide_tune_chipset (ide_drive_t *driv
> > switch(speed) {
> > #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> > case XFER_UDMA_6:
> > - if (pmif->kind != controller_sh_ata6)
> > - return 1;
> > case XFER_UDMA_5:
> > - if (pmif->kind != controller_un_ata6 &&
> > - pmif->kind != controller_k2_ata6 &&
> > - pmif->kind != controller_sh_ata6)
> > - return 1;
> > case XFER_UDMA_4:
> > case XFER_UDMA_3:
> > - if (drive->hwif->cbl != ATA_CBL_PATA80)
> > - return 1;
> > case XFER_UDMA_2:
> > case XFER_UDMA_1:
> > case XFER_UDMA_0:
>
> BTW, I just saw a stange code in this driver that clips hwif->udma_mask
> depending on pmif->cable_80. I somewhat doubt that it's necessary...
Yes, hwif->ultra_mask(s) shouldn't depend on pmif->cable_80.
This doesn't hurt nowadays but may hurt in the future (warmplug/hotplug).
Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
