On Wednesday 11 July 2007, Bartlomiej Zolnierkiewicz wrote:
>
> * Add { 0, 0 } entry to {kauai,shasta}_pio_timings[] so kauai_lookup_timing()
> always returns a valid PIO timing (fixes PIO timing not being set for
> devices
> with minimum PIO cycle <= 120ns).
>
> * Add setting transfer mode on the device to pmac_ide_set_pio_mode().
>
> * Fix pmac_ide_set_pio() to always program chipset for given PIO timing
> instead
> of only when the device we want to program PIO timing for is the currently
> selected one.
>
> * Now that pmac_ide_set_pio() is fixed there is no need to set transfer mode
> on the device and program chipset for PIO in pmac_ide_tune_chipset()
> (returning 0 == success is not entirely correct but is OK for now since
> the upper layers are only checking ->speedproc return value for DMA modes).
> This patch should have no effect on the default kernel behavior because
> IDE pmac driver doesn't enable ->autotune (this would also explain why some
> of the above bugs remained unfixed for so long).
This part of the patch description is actually incorrect: ->tuneproc is used
unconditionally during suspend so the patch has the real effect (hopefully
positive :) on the default kernel behavior.
> Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
> Cc: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
> Cc: Paul Mackerras <[EMAIL PROTECTED]>
> Cc: Kyle McMartin <[EMAIL PROTECTED]>
> ---
> drivers/ide/ppc/pmac.c | 19 ++++++++++---------
> 1 file changed, 10 insertions(+), 9 deletions(-)
>
> Index: b/drivers/ide/ppc/pmac.c
> ===================================================================
> --- a/drivers/ide/ppc/pmac.c
> +++ b/drivers/ide/ppc/pmac.c
> @@ -311,7 +311,8 @@ static struct kauai_timing kauai_pio_tim
> { 240 , 0x0800038b },
> { 239 , 0x0800030c },
> { 180 , 0x05000249 },
> - { 120 , 0x04000148 }
> + { 120 , 0x04000148 },
> + { 0 , 0 },
> };
>
> static struct kauai_timing kauai_mdma_timings[] =
> @@ -351,7 +352,8 @@ static struct kauai_timing shasta_pio_ti
> { 240 , 0x040003cd },
> { 239 , 0x040003cd },
> { 180 , 0x0400028b },
> - { 120 , 0x0400010a }
> + { 120 , 0x0400010a },
> + { 0 , 0 },
> };
>
> static struct kauai_timing shasta_mdma_timings[] =
> @@ -631,8 +633,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
> case controller_sh_ata6: {
> /* 133Mhz cell */
> u32 tr = kauai_lookup_timing(shasta_pio_timings, cycle_time);
> - if (tr == 0)
> - return;
> *timings = ((*timings) & ~TR_133_PIOREG_PIO_MASK) | tr;
> break;
> }
> @@ -640,8 +640,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
> case controller_k2_ata6: {
> /* 100Mhz cell */
> u32 tr = kauai_lookup_timing(kauai_pio_timings, cycle_time);
> - if (tr == 0)
> - return;
> *timings = ((*timings) & ~TR_100_PIOREG_PIO_MASK) | tr;
> break;
> }
> @@ -692,8 +690,11 @@ pmac_ide_set_pio_mode(ide_drive_t *drive
> drive->name, pio, *timings);
> #endif
>
> - if (drive->select.all == HWIF(drive)->INB(IDE_SELECT_REG))
> - pmac_ide_do_update_timings(drive);
> + if (pmac_ide_do_setfeature(drive, speed))
> + return;
> +
> + pmac_ide_do_update_timings(drive);
> + drive->current_speed = speed;
> }
>
> #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
> @@ -962,7 +963,7 @@ static int pmac_ide_tune_chipset(ide_dri
> case XFER_PIO_1:
> case XFER_PIO_0:
> pmac_ide_set_pio_mode(drive, speed & 0x07);
> - break;
> + return 0;
> default:
> ret = 1;
> }
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
