Dne Wednesday 18 of July 2007 11:45:46 jste napsal(a): > Pavel Mateja wrote: > > Dne Wednesday 18 of July 2007 11:35:00 jste napsal(a): > >> Pavel Mateja wrote: > >>> ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen > >>> ata2: (irq_stat 0x00000040, connection status changed) > >>> ata4: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen > >>> ata4: (irq_stat 0x00000040, connection status changed) > >>> ata2: soft resetting port > >> > >> Please check power supply and re-cable things. > > > > Funny thing is there are no cables to be checked. Nothing is connected to > > those ports. Just ata1 is occupied by disk. > > Sigh... The controller is telling the driver that "there's something > going on this port (hotplug event), please take look". Can you try > hotplug some device at those ports and report the resulting kernel log?
Hotplug was working in cca 1 of 8 attemps. ata4: soft resetting port ata4: SATA link down (SStatus 1 SControl 300) ata4: EH complete ata4: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen ata4: (irq_stat 0x00000040, connection status changed) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4060000 action 0x2 frozen ata2: (irq_stat 0x00000040, connection status changed) ata4: soft resetting port ata2: soft resetting port ata2: SATA link down (SStatus 1 SControl 300) ata2: EH complete ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-6: ST3120026AS, 8.05, max UDMA/133 ata4.00: 234375000 sectors, multi 0: LBA48 ata4.00: configured for UDMA/133 ata4: EH complete Device driver target3:0:0 lacks bus and class support for being resumed. scsi 3:0:0:0: Direct-Access ATA ST3120026AS 8.05 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 234375000 512-byte hardware sectors (120000 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 234375000 512-byte hardware sectors (120000 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 3:0:0:0: [sdb] Attached SCSI disk -- Pavel Mateja - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
