sis_66_set_dmamode() also handles early UDMA100 (SIS630 ET) but is
missing udma timing value for UDMA100. According to sis5513, this
should be 0x8000. This caused UDMA100 device to fail on pata_sis till
it downgrades to UDMA66 while it works fine on sis5513 at UDMA100.
Reported by Adam Blech.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
Cc: Adam Blech <[EMAIL PROTECTED]>
---
drivers/ata/pata_sis.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index da3f720..3b5be77 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -376,8 +376,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct
ata_device *adev)
int drive_pci = sis_old_port_base(adev);
u16 timing;
+ /* MWDMA 0-2 and UDMA 0-5 */
const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
+ const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000,
0x8000 };
pci_read_config_word(pdev, drive_pci, &timing);
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
