libata EH used to ignore errors not associated with commands when
determining whether speed down is necessary or not.  This leads to the
following problems.

* Errors not associated with commands can occur indefinitely without
  libata EH taking corrective actions.

* Upstream link errors don't trigger speed down when PMP is attached
  to it and commands issued to downstream device trigger errors on the
  upstream link.

This patch makes ata_eh_link_autopsy() consider errors not associated
with command for speed down.

Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
 drivers/ata/libata-eh.c |   19 +++++++++++++------
 1 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 10af1a8..ded44bd 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1747,6 +1747,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 {
        struct ata_port *ap = link->ap;
        struct ata_eh_context *ehc = &link->eh_context;
+       struct ata_device *dev;
        unsigned int all_err_mask = 0;
        int tag, is_io = 0;
        u32 serror;
@@ -1819,18 +1820,24 @@ static void ata_eh_link_autopsy(struct ata_link *link)
        else if (all_err_mask)
                ehc->i.action |= ATA_EH_REVALIDATE;
 
-       /* if we have offending qcs and the associated failed device */
+       /* If we have offending qcs and the associated failed device,
+        * perform per-dev EH action only on the offending device.
+        */
        if (ehc->i.dev) {
-               /* speed down */
-               ehc->i.action |= ata_eh_speed_down(ehc->i.dev, is_io,
-                                                  all_err_mask);
-
-               /* perform per-dev EH action only on the offending device */
                ehc->i.dev_action[ehc->i.dev->devno] |=
                        ehc->i.action & ATA_EH_PERDEV_MASK;
                ehc->i.action &= ~ATA_EH_PERDEV_MASK;
        }
 
+       /* consider speeding down */
+       dev = ehc->i.dev;
+       if (!dev && ata_link_max_devices(link) == 1 &&
+           ata_dev_enabled(link->device))
+               dev = link->device;
+
+       if (dev)
+               ehc->i.action |= ata_eh_speed_down(dev, is_io, all_err_mask);
+
        DPRINTK("EXIT\n");
 }
 
-- 
1.5.2.4

-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to