On Monday 10 December 2007, Sergei Shtylyov wrote:
> Bartlomiej Zolnierkiewicz wrote:
>
> > Don't enable local IRQs for PIO-in protocol in driver_cmd_intr().
>
> > While at it:
>
> > * Remove redundant rq->cmd_type check.
>
> > * Read status register after enabling local IRQs for no-data protocol.
>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
>
> > Index: b/drivers/ide/ide-io.c
> > ===================================================================
> > --- a/drivers/ide/ide-io.c
> > +++ b/drivers/ide/ide-io.c
> > @@ -638,17 +638,18 @@ static ide_startstop_t drive_cmd_intr (i
> > {
> > struct request *rq = HWGROUP(drive)->rq;
> > ide_hwif_t *hwif = HWIF(drive);
> > - u8 *args = (u8 *) rq->buffer;
> > - u8 stat = hwif->INB(IDE_STATUS_REG);
> > + u8 *args = (u8 *)rq->buffer, pio_in = (args && args[3]) ? 1 : 0, stat;
> >
> > - local_irq_enable_in_hardirq();
> > - if (rq->cmd_type == REQ_TYPE_ATA_CMD &&
> > - (stat & DRQ_STAT) && args && args[3]) {
> > + if (pio_in) {
> > u8 io_32bit = drive->io_32bit;
> > + stat = hwif->INB(IDE_STATUS_REG);
>
> You've lost DRQ=1 check (which is returned in the next patch however)...
Thanks, revised patch below.
[PATCH] ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)
Don't enable local IRQs for PIO-in protocol in driver_cmd_intr().
While at it:
* Remove redundant rq->cmd_type check.
* Read status register after enabling local IRQs for no-data protocol.
v2:
* Re-add DRQ=1 check lost in v1 (noticed by Sergei).
Cc: Sergei Shtylyov <[EMAIL PROTECTED]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
drivers/ide/ide-io.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -638,19 +638,22 @@ static ide_startstop_t drive_cmd_intr (i
{
struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive);
- u8 *args = (u8 *) rq->buffer;
- u8 stat = hwif->INB(IDE_STATUS_REG);
+ u8 *args = (u8 *)rq->buffer, pio_in = (args && args[3]) ? 1 : 0, stat;
- local_irq_enable_in_hardirq();
- if (rq->cmd_type == REQ_TYPE_ATA_CMD &&
- (stat & DRQ_STAT) && args && args[3]) {
+ if (pio_in) {
u8 io_32bit = drive->io_32bit;
+ stat = hwif->INB(IDE_STATUS_REG);
+ if ((stat & DRQ_STAT) == 0)
+ goto out;
drive->io_32bit = 0;
hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);
drive->io_32bit = io_32bit;
stat = wait_drive_not_busy(drive);
+ } else {
+ local_irq_enable_in_hardirq();
+ stat = hwif->INB(IDE_STATUS_REG);
}
-
+out:
if (!OK_STAT(stat, READY_STAT, BAD_STAT))
return ide_error(drive, "drive_cmd", stat);
/* calls ide_end_drive_cmd */
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
