On Monday 10 December 2007, Sergei Shtylyov wrote:
> Bartlomiej Zolnierkiewicz wrote:
> 
> > Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
> 
> Acked-by: Sergei Shtylyov <[EMAIL PROTECTED]>
> 
> > Index: b/drivers/ide/ide-taskfile.c
> > ===================================================================
> > --- a/drivers/ide/ide-taskfile.c
> > +++ b/drivers/ide/ide-taskfile.c
> > @@ -260,7 +260,7 @@ static ide_startstop_t task_no_data_intr
> >     return ide_stopped;
> >  }
> >  
> > -static u8 wait_drive_not_busy(ide_drive_t *drive)
> > +u8 wait_drive_not_busy(ide_drive_t *drive)
> >  {
> >     ide_hwif_t *hwif = HWIF(drive);
> >     int retries;
> 
>    I think you should remove the comment line below:
> 
>       * (drive_cmd_intr waits that long).

Done.

[PATCH] ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)

Use wait_drive_not_busy() in drive_cmd_intr().

v2:
* Fix wait_drive_not_busy() comment (noticed by Sergei).

Acked-by: Sergei Shtylyov <[EMAIL PROTECTED]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
 drivers/ide/ide-io.c       |    4 +---
 drivers/ide/ide-taskfile.c |    5 ++---
 include/linux/ide.h        |    2 ++
 3 files changed, 5 insertions(+), 6 deletions(-)

Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -640,7 +640,6 @@ static ide_startstop_t drive_cmd_intr (i
        ide_hwif_t *hwif = HWIF(drive);
        u8 *args = (u8 *) rq->buffer;
        u8 stat = hwif->INB(IDE_STATUS_REG);
-       int retries = 10;
 
        local_irq_enable_in_hardirq();
        if (rq->cmd_type == REQ_TYPE_ATA_CMD &&
@@ -649,8 +648,7 @@ static ide_startstop_t drive_cmd_intr (i
                drive->io_32bit = 0;
                hwif->ata_input_data(drive, &args[4], args[3] * SECTOR_WORDS);
                drive->io_32bit = io_32bit;
-               while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && 
retries--)
-                       udelay(100);
+               stat = wait_drive_not_busy(drive);
        }
 
        if (!OK_STAT(stat, READY_STAT, BAD_STAT))
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -260,7 +260,7 @@ static ide_startstop_t task_no_data_intr
        return ide_stopped;
 }
 
-static u8 wait_drive_not_busy(ide_drive_t *drive)
+u8 wait_drive_not_busy(ide_drive_t *drive)
 {
        ide_hwif_t *hwif = HWIF(drive);
        int retries;
@@ -268,8 +268,7 @@ static u8 wait_drive_not_busy(ide_drive_
 
        /*
         * Last sector was transfered, wait until drive is ready.
-        * This can take up to 10 usec, but we will wait max 1 ms
-        * (drive_cmd_intr() waits that long).
+        * This can take up to 10 usec, but we will wait max 1 ms.
         */
        for (retries = 0; retries < 100; retries++) {
                if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT)
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -994,6 +994,8 @@ ide_startstop_t do_rw_taskfile(ide_drive
 
 void task_end_request(ide_drive_t *, struct request *, u8);
 
+u8 wait_drive_not_busy(ide_drive_t *);
+
 int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *, u16);
 int ide_no_data_taskfile(ide_drive_t *, ide_task_t *);
 
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to