Hi Tejun,
On Wednesday 09 January 2008, Tejun Heo wrote:
> Hello, all.
>
> Broken MWDMA on pata_ali has caused a number of bug reports. I've been
> trying to fix it for some time now && finally got a machine with
> pata_ali and non-working MWDMA2 ATAPI device on my desk a few weeks ago.
> Testing confirms what users have been reporting - MWDMA2 works fine
> with the IDE alim15x3 driver while any DMA data transfer on pata_ali
> times out.
>
> At first I thought this was simple timing programming error, but no.
> pata_ali's mode programming wasn't wrong although it was different in
> how it programs empty slots. Even after making pata_ali to program the
> controller exactly the same as alim15x3 (identical lspci -xxx results),
> MWDMA didn't work. (attached)
>
> I wondered whether the device was configured differently, so compared
> hdparm --Istdout results. They were identical too. (attached)
ATA device, with non-removable media
Model Number: IC25N040ATMR04-0
Serial Number: MRG208K2K3A37H
Firmware Revision: MO2OAD5A
...
Could you also send hdparm output for ATAPI device? Does it use CDB intr?
> I walked through IDE and libata codes and found some differences in the
> order registers are accessed and which values are written (e.g. libata
> never turns on device 0/1 DMA capable bits in BMDMA status register
> while IDE does). I made them access the registers in the same order and
> write the same values. Still no go.
>
> Then, I made libata probing sequence very close to IDE such that no
> reset is performed and NIEN isn't tempered with. No go.
>
> I thought maybe the drive should just be blacklisted. I took the laptop
> apart, took out the DVD combo drive to ICH7 ata_piix. It works just fine.
>
> So, I'm out of ideas at this point. Any suggestions? Ideas?
If ATAPI device uses CDB intr then ->irq_clear will be called by
ata_host_intr() on CDB IRQ and may confuse DMA engine (it shouldn't
on most chipsets but older ALi-s are pretty weird)...?
Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
