Added a couple patches, and updated for 2.6.11-release.
BK users:
bk pull bk://gkernel.bkbits.net/libata-dev-2.6
or
bk pull bk://kernel.bkbits.net/jgarzik/libata-dev-2.6
Patch:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/2.6.11-libata-dev1.patch.bz2
This will update the following files:
drivers/scsi/Kconfig | 18
drivers/scsi/Makefile | 2
drivers/scsi/ahci.c | 107 ++++-
drivers/scsi/ata_adma.c | 778 +++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/libata-core.c | 312 +++++++++--------
drivers/scsi/libata-scsi.c | 701 ++++++++++++++++++++++++++++++++------
drivers/scsi/libata.h | 6
drivers/scsi/pata_pdc2027x.c | 771 ++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/sata_nv.c | 6
drivers/scsi/sata_promise.c | 84 ++++
drivers/scsi/sata_qstor.c | 50 +-
drivers/scsi/sata_sil.c | 2
drivers/scsi/sata_svw.c | 4
drivers/scsi/sata_vsc.c | 7
include/linux/ata.h | 15
include/linux/libata.h | 10
include/scsi/scsi.h | 3
17 files changed, 2564 insertions(+), 312 deletions(-)
through these ChangeSets:
<andyw:pobox.com>:
o [libata scsi] support 12-byte passthru CDB
o [libata scsi] passthru CDB check condition processing
o T10/04-262 ATA pass thru - patch
<erikbenada:yahoo.ca>:
o [libata sata_promise] support PATA ports on SATA controllers
<liml:rtr.ca>:
o sata_qstor: eh_timeout fix
<tklauser:nuerscht.ch>:
o drivers/scsi/ahci: Use the DMA_{64,32}BIT_MASK constants
o drivers/scsi/sata_vsc: Use the DMA_{64,32}BIT_MASK constants
Adam J. Richter:
o ata_pci_remove_one used freed memory
Adrian Bunk:
o drivers/scsi/sata_*: make code static
Albert Lee:
o [libata] use init-device-params ATA command where needed
o [libata] ata_scsi_verify_xlat() fix
o pdc2027x timing register fix for 100MHz
o [libata] CHS support: add CHS support to ata_scsi_verify_xlat(),
ata_scsi_rw_xlat() and ata_scsiop_read_cap().
o [libata] CHS support: reorganize read/write translation in
ata_scsi_rw_xlat()
o [libata] CHS support: rename vars (s/sector/block/) in
ata_scsi_verify_xlat()
o [libata] CHS support: detect C/H/S at IDENTIFY DEVICE time
o [libata] CHS support: add definitions to headers
o pdc2027x timing register bug fix
o [libata pdc2027x] fix incorrect pio and mwdma masks
o [libata pdc2027x] remove quirks and ROM enable
o [libata] add driver for Promise PATA 2027x
Brad Campbell:
o libata basic detection and errata for PATA->SATA bridges
Jeff Garzik:
o [libata ahci] Print out port id on error messages
o [libata ahci] support PCI MSI interrupt vector
o [libata adma] Add init code, fix CPB submission code
o [libata ahci] finish ATAPI support
o [libata adma] trivial whitespace cleanup
o [libata dma] fix DMA mode config; add some more initialization code
o [libata adma] add support for configuring PIO/DMA modes
o [libata] turn on ATAPI support
o [libata sata_promise] merge Tobias Lorenz' pdc20619 patch, part 2
o [libata] small cleanups
o [libata] remove unused execute-device-diagnostic reset method
o [libata] add new driver ata_adma
o [libata pdc2027x] update for upstream struct device conversion
o [libata sata_promise] fix merge bugs
o [libata] fix build breakage
o [libata] fix SATA->PATA bridge detect compile breakage
o [libata] fix printk warning
John W. Linville:
o libata: update ATA pass thru opcodes
o libata: minor style changes in ata_scsi_pass_thru
o libata: filter SET_FEATURES - XFER MODE from ATA pass thru
o libata: sync SMART ioctls with ATA pass thru spec (T10/04-262r7)
o libata: fix command queue leak when xlat_func fails
o libata: SMART support via ATA pass-thru
Mark Lord:
o [libata qstor] minor update per LKML comments
Tobias Lorenz:
o [libata sata_promise] pdc20619 (PATA) support
o libata-scsi: get-identity ioctl support
