I have a gigabyte GA-8i915g Pro mobo, with a 82801FR (ICH6) hub (checked with lspci). One SATA Maxtor 6B300S0. I've used the ata-piix compiled in the past ( not as a module). That worked.

So, messing around I rebuilt with support for the ahci module in 2.6.12-rc2 and left in the ata-piix module.

This is the boot drive, and it fails. If I rebuild again without the ahci module ( same config otherwise - ata -piix as a module ) it still fails!

BTW, the RedHat fedora fc4 kernels fail. It's the same problem since they're module based. But, the fc3 kernels work. Odd

So I rebuilt again with ahci built in - no ata-piix. That failed. Then I tried BOTH. That worked. dmesg shows:

libata version 1.10 loaded.
ata_piix version 1.03

To sum up, the only way I've been able to boot is using ata-piix built in - not as a module.

And ahci won't load with ich6.

sean

-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to