Jeff Garzik <jgarzik <at> pobox.com> writes: > > > This is some info that Silicon Image provided, for use in developing > SATA hotplug. This info is public and not NDA as of the publishing of > the SiI 311x hardware documentation at > > http://gkernel.sourceforge.net/specs/sii/ > > Kudos again to SiI for opening their 311x and CMD680 [PATA] docs. > > Jeff > > > > > Here are some writeups for our 3112/3152 hot plug/unplug handling. Hope it will > help in your open source development. > > For the 3114 controller, the sequence is essentially the same as the 3112 except > that the PHYRDY change handler does not need to reset the channel and of course > obvious changes to handle the two additional channels of the 3114. > > Best regards, > [silicon image person] >
Hi, This is Ricky. I am finding solution of sil 3512 chip hotswap problem. I think this doc can help some. But I don't really understand libata very much. Can someone help some ideas?..Thanks I know I should do something in interrupt handler in libata.c like check status of plug/unplug. Is is right? - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
