My Maxtor Hard Disk supports UDMA <= 6 (133) How can I control BITS options in controller ? What's line command ? How can I verify controller is properly configured in my kernel ?
>-- Messaggio Originale -- >Subject: Re: UDMA modes >From: Erik Slagter <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Cc: [email protected] >Date: Tue, 16 Aug 2005 11:05:17 +0200 > > >On Tue, 2005-08-16 at 09:02 +0200, [EMAIL PROTECTED] wrote: >> I have motherboard which supports DMA ATA 66/100/133 and I connect HD with >> new 80-wire cable. >> I have FC3 with Kernel 2.6.9 >> With hdparm -i /dev/hda I get: >> >> DMA modes: udma0 udma1 udma2 >> UDMA modes: udma0 udma1 *udma2 >> >> Why udma is 2 and not udma 5 ? > >Controller not explicitly supported by linux or not configured in the >kernel? Controller needs BITS option? (see IDE config). Harddisk doesn't >support > udma2? > >Allegato: signature.asc > __________________________________________________________________ TISCALI ADSL 1.25 MEGA Solo con Tiscali Adsl navighi senza limiti e telefoni senza canone Telecom a partire da 19,95 Euro/mese. Attivala entro il 31 agosto, il primo MESE รจ GRATIS! CLICCA QUI. http://abbonati.tiscali.it/adsl/sa/1e25flat_tc/ - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
