On Sat, Aug 27 2005, Douglas Gilbert wrote:
> Jeff Garzik wrote:
> > Does the attached look OK to everybody?
> >
>
> Jeff,
> Yes.
>
> And after an exchange with Jens, it would probably be
> safer to map transfer_length=0 for READ_10 and READ_16
> (as well as WRITE_10 and WRITE_16) to a nop on the ATA
> side. Otherwise an ATA disk may attempt to transfer 2**16
> sectors. [Only READ_6 and WRITE_6 have the quirky "0 means
> 256" definition, in the larger commands "0 means 0".]
Yes, that part needs to be added as well. Jeff, the below looks good for
the READ/WRITE_6 case.
> > if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
> > qc->nsect = tf->nsect = scsicmd[4];
> > + if (!qc->nsect) {
> > + qc->nsect = 256;
> > + if (lba48)
> > + tf->hob_nsect = 1;
> > + }
> > +
> > tf->lbal = scsicmd[3];
> > tf->lbam = scsicmd[2];
> > tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */
>
>
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
