Wes Newell <[EMAIL PROTECTED]> writes: > Uwe Koziolek wrote: > >>Hello Wes, >> >>i include for you a hothack for SiS180 into the sata5513, untested and >>not pretty. >> >> >> > I tried this one first. It found the controller but errored out. here > the relevant dmesg. > > Linux version 2.6.11-12mdkcustom ([EMAIL PROTECTED]) (gcc version 3.4.3 > (Mandrakelinux 10.2 3.4.3-7mdk)) #1 Tue Aug 23 23:58:08 CDT 2005 > > SIS5513: IDE controller at PCI slot 0000:00:0c.0 > SIS5513: chipset revision 0 > SIS5513: IDE controller at PCI slot 0000:00:0c.0 > SIS5513: chipset revision 0 > SIS_IDE: probe of 0000:00:0c.0 failed with error -1 > >
strange.. it's like the driver didn't recognize your chipset. According to Jetway you have a 963L MuTIOL chipset which is afaik supported by the driver. Could you try the sis5113.c I've attached ? It's the same one as the one submitted by Uwe. I only added some silly printks. >>additional i include the patch submitted by Arnaud Patard. >> >> >> > I'm not sure how or to which sata_sis.c file to apply this. I've got > the one that came with the above kernel, and then I've got the one I the sata_sis from the 2.6.11-12mdk is the same as the one on kernel.org. > downloaded from SIS that locks up the system when a pata drive is > installed on the sis180. The first was simple enough, just replaced > the original sis5513.c and recompiled the kernel. Don't know what to > do with this one. > >>If the last one works, it is the better solution, with chances to be >>included into the kernel. >> >> >> > Is the sata_sis patch suppossed to add pata support. Can't tell from > his message and the code is greek to me. I've configured the registers of the card when in pata mode but it's not tested (I've only a SiS964L and SiS182 handy). I've only tested SATA mode for SiS180 and SiS182. Regards, Arnaud Patard - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
