ata_get_mode_mask() has PIO modes 3 and 4 as bits 3 and 4 in the pio_mask
since the value read from the drive is shifted left by 3 bits and OR'd with
0x7 (which corresponds to PIO 2-0). Thus, the drivers below need adjustments
to comply with the way pio_mask is used. I left the masks in a state which
agrees with the existing comments; perhaps they all should get 0x1f to
indicate driver support for PIO4-0 but that can be done later.
Signed-off-by: Brett Russ <[EMAIL PROTECTED]>
Index: linux-2.6.13/drivers/scsi/ahci.c
===================================================================
--- linux-2.6.13.orig/drivers/scsi/ahci.c
+++ linux-2.6.13/drivers/scsi/ahci.c
@@ -244,7 +244,7 @@ static struct ata_port_info ahci_port_in
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
ATA_FLAG_PIO_DMA,
- .pio_mask = 0x03, /* pio3-4 */
+ .pio_mask = 0x18, /* pio3-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
Index: linux-2.6.13/drivers/scsi/sata_uli.c
===================================================================
--- linux-2.6.13.orig/drivers/scsi/sata_uli.c
+++ linux-2.6.13/drivers/scsi/sata_uli.c
@@ -120,7 +120,7 @@ static struct ata_port_info uli_port_inf
.sht = &uli_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
ATA_FLAG_NO_LEGACY,
- .pio_mask = 0x03, //support pio mode 4 (FIXME)
+ .pio_mask = 0x10, //support pio mode 4 (FIXME)
.udma_mask = 0x7f, //support udma mode 6
.port_ops = &uli_ops,
};
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
