Jeff Garzik wrote:
Tejun Heo wrote:
In the following mail, I've attached a patch which might alleviate
errors during writes (as Alexander was reporting CRC errors with write
commands), but it won't do any good if you're getting errors during
reading.
http://marc.theaimsgroup.com/?l=linux-ide&m=112602112819183&w=2
Note that I would put BIG CAPITAL LETTER WARNINGS on that patch, since
it messes with the voltage.
Alexander & Jeremy.
It's as Jeff said.
TRY THE PATCH AT YOUR OWN RISK. IT MIGHT FRY PHY OF YOUR DRIVE.
(enough capitals?)
Even if you're brave enough to try, DO NOT GO OVER 600mV. 600mV is at
least inside specified limits. Also, it won't change anything regarding
read errors. All it does is increasing voltage swing while transmitting
data (writes).
Thanks.
--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
