Fix ata_scmd_need_defer() such that...
* whether NCQ is used or not is exactly determined using the same
criteria as the issue path.
* defer-check is performed in all cases.
This fixes race condition where turning off NCQ on the fly causes
non-NCQ commands sneak into NCQ phase.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
drivers/ata/libata-scsi.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
Index: work/drivers/ata/libata-scsi.c
===================================================================
--- work.orig/drivers/ata/libata-scsi.c
+++ work/drivers/ata/libata-scsi.c
@@ -1495,11 +1495,9 @@ static void ata_scsi_qc_complete(struct
static int ata_scmd_need_defer(struct ata_device *dev, int is_io)
{
struct ata_port *ap = dev->ap;
+ int is_ncq = is_io && ata_ncq_enabled(dev);
- if (!(dev->flags & ATA_DFLAG_NCQ))
- return 0;
-
- if (is_io) {
+ if (is_ncq) {
if (!ata_tag_valid(ap->active_tag))
return 0;
} else {
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
