1/ Clean up vsc_sata_interrupt and have it call vsc_port_intr to handle the
interrupt.
2/ Enable all interrupts in vsc_intr_mask_update to detect errors and
hotplug events
3/ Hook up vsc_freeze and vsc_thaw in vsc_sata_ops
4/ Remove the now unnecessary is_vsc_sata_int_err
Tested with an iq3124h PCI-X add-in card on an iop13xx.
Cc: Jeremy Higdon <[EMAIL PROTECTED]>
Signed-off-by: Dan Williams <[EMAIL PROTECTED]>
---
drivers/ata/sata_vsc.c | 74 +++++++++++++++---------------------------------
1 files changed, 23 insertions(+), 51 deletions(-)
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index cc73797..48d8675 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -99,10 +99,6 @@ enum {
VSC_SATA_SERR_INVALID_FIS = (1 << 25),
};
-#define is_vsc_sata_int_err(port_idx, int_status) \
- (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
-
-
static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
if (sc_reg > SCR_CONTROL)
@@ -149,9 +145,9 @@ static void vsc_intr_mask_update(struct ata_port *ap, u8
ctl)
VSC_SATA_INT_MASK_OFFSET + ap->port_no;
mask = readb(mask_addr);
if (ctl & ATA_NIEN)
- mask |= 0x80;
+ mask = 0xff;
else
- mask &= 0x7F;
+ mask = 0x0;
writeb(mask, mask_addr);
}
@@ -290,59 +286,35 @@ static irqreturn_t vsc_sata_interrupt (int irq, void
*dev_instance)
struct ata_host *host = dev_instance;
unsigned int i;
unsigned int handled = 0;
- u32 int_status;
+ u32 status;
- spin_lock(&host->lock);
+ status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
- int_status = readl(host->iomap[VSC_MMIO_BAR] +
- VSC_SATA_INT_STAT_OFFSET);
-
- for (i = 0; i < host->n_ports; i++) {
- if (int_status & ((u32) 0xFF << (8 * i))) {
- struct ata_port *ap;
+ if (status == 0xffffffff) {
+ printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
+ "PCI fault or device removal?\n");
+ goto out;
+ } else if (!status)
+ goto out;
- ap = host->ports[i];
+ spin_lock(&host->lock);
- if (is_vsc_sata_int_err(i, int_status)) {
- u32 err_status;
- printk(KERN_DEBUG "%s: ignoring
interrupt(s)\n", __FUNCTION__);
- err_status = ap ? vsc_sata_scr_read(ap,
SCR_ERROR) : 0;
- vsc_sata_scr_write(ap, SCR_ERROR, err_status);
- handled++;
- }
+ for (i = 0; i < host->n_ports; i++) {
+ u8 port_status = (status >> (8 * i)) & 0xff;
+ if (port_status) {
+ struct ata_port *ap = host->ports[i];
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled += ata_host_intr(ap, qc);
- else if (is_vsc_sata_int_err(i, int_status)) {
- /*
- * On some chips (i.e. Intel 31244), an
error
- * interrupt will sneak in at
initialization
- * time (phy state changes). Clearing
the SCR
- * error register is not required, but
it prevents
- * the phy state change interrupts from
recurring
- * later.
- */
- u32 err_status;
- err_status = vsc_sata_scr_read(ap,
SCR_ERROR);
- printk(KERN_DEBUG "%s: clearing
interrupt, "
- "status %x; sata err status
%x\n",
- __FUNCTION__,
- int_status, err_status);
- vsc_sata_scr_write(ap, SCR_ERROR,
err_status);
- /* Clear interrupt status */
- ata_chk_status(ap);
- handled++;
- }
- }
+ vsc_port_intr(port_status, ap);
+ handled++;
+ } else
+ printk(KERN_ERR DRV_NAME
+ ": interrupt from disabled port %d\n",
i);
}
}
spin_unlock(&host->lock);
-
+out:
return IRQ_RETVAL(handled);
}
@@ -380,8 +352,8 @@ static const struct ata_port_operations vsc_sata_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
+ .freeze = vsc_freeze,
+ .thaw = vsc_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_handler = vsc_sata_interrupt,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
