Reimplement jmicron ATA quirk.
* renamed to quirk_jmicron_ata()
* quirk is invoked only for the affected controllers
* programming is stricter. e.g. conf5 bit24 is cleared if
unnecessary.
* code factored for readability
* JMB360 and JMB368 are programmed into proper mode
Verified on JMB360, 363 and 368.
Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
---
drivers/pci/quirks.c | 80 +++++++++++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 30 deletions(-)
Index: work/drivers/pci/quirks.c
===================================================================
--- work.orig/drivers/pci/quirks.c
+++ work/drivers/pci/quirks.c
@@ -1218,45 +1218,65 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_V
* do this early on to make the additional device appear during
* the PCI scanning.
*/
-
-static void quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_ata(struct pci_dev *pdev)
{
- u32 conf;
+ u32 conf1, conf5;
u8 hdr;
/* Only poke fn 0 */
if (PCI_FUNC(pdev->devfn))
return;
- switch(pdev->device) {
- case PCI_DEVICE_ID_JMICRON_JMB365:
- case PCI_DEVICE_ID_JMICRON_JMB366:
- /* Redirect IDE second PATA port to the right spot */
- pci_read_config_dword(pdev, 0x80, &conf);
- conf |= (1 << 24);
- /* Fall through */
- pci_write_config_dword(pdev, 0x80, conf);
- case PCI_DEVICE_ID_JMICRON_JMB361:
- case PCI_DEVICE_ID_JMICRON_JMB363:
- pci_read_config_dword(pdev, 0x40, &conf);
- /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
- /* Set the class codes correctly and then direct IDE 0
*/
- conf &= ~0x000FF200; /* Clear bit 9 and 12-19 */
- conf |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
- pci_write_config_dword(pdev, 0x40, conf);
-
- /* Reconfigure so that the PCI scanner discovers the
- device is now multifunction */
-
- pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
- pdev->hdr_type = hdr & 0x7f;
- pdev->multifunction = !!(hdr & 0x80);
+ pci_read_config_dword(pdev, 0x40, &conf1);
+ pci_read_config_dword(pdev, 0x80, &conf5);
+
+ conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
+ conf5 &= ~(1 << 24); /* Clear bit 24 */
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_JMICRON_JMB360:
+ /* The controller should be in single function ahci mode */
+ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
+ break;
- break;
+ case PCI_DEVICE_ID_JMICRON_JMB365:
+ case PCI_DEVICE_ID_JMICRON_JMB366:
+ /* Redirect IDE second PATA port to the right spot */
+ conf5 |= (1 << 24);
+ /* Fall through */
+ case PCI_DEVICE_ID_JMICRON_JMB361:
+ case PCI_DEVICE_ID_JMICRON_JMB363:
+ /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+ /* Set the class codes correctly and then direct IDE 0 */
+ conf1 |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB368:
+ /* The controller should be in single function IDE mode */
+ conf1 |= 0x00C00000; /* Set 22, 23 */
+ break;
}
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID,
quirk_jmicron_dualfn);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID,
quirk_jmicron_dualfn);
+
+ pci_write_config_dword(pdev, 0x40, conf1);
+ pci_write_config_dword(pdev, 0x80, conf5);
+
+ /* Update pdev accordingly */
+ pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+ pdev->hdr_type = hdr & 0x7f;
+ pdev->multifunction = !!(hdr & 0x80);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
quirk_jmicron_ata);
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
