From: Alan <[EMAIL PROTECTED]>
If you've got a CF adapter or PCMCIA disc which shows up twice in libata
pata_pcmcia can you try this patch on top of the updates posted. It tries
to spot when the slave is a mirror of the master and to fix up problems
that causes.
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/ata/pata_pcmcia.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff -puN drivers/ata/pata_pcmcia.c~pcmcia-spot-slave-decode-flaws-for-testing
drivers/ata/pata_pcmcia.c
--- a/drivers/ata/pata_pcmcia.c~pcmcia-spot-slave-decode-flaws-for-testing
+++ a/drivers/ata/pata_pcmcia.c
@@ -54,6 +54,39 @@ struct ata_pcmcia_info {
dev_node_t node;
};
+/**
+ * pcmcia_set_mode - PCMCIA specific mode setup
+ * @ap: Port
+ * @r_failed_dev: Return pointer for failed device
+ *
+ * Perform the tuning and setup of the devices and timings, which
+ * for PCMCIA is the same as any other controller. We wrap it however
+ * as we need to spot hardware with incorrect or missing master/slave
+ * decode, which alas is embarrassingly common in the PC world
+ */
+
+static int pcmcia_set_mode(struct ata_port *ap, struct ata_device
**r_failed_dev)
+{
+ struct ata_device *master = &ap->device[0];
+ struct ata_device *slave = &ap->device[1];
+
+ if (!ata_dev_enabled(master) || !ata_dev_enabled(slave))
+ return ata_do_set_mode(ap, r_failed_dev);
+
+ if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV,
+ ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0)
+ {
+ /* Suspicious match, but could be two cards from
+ the same vendor - check serial */
+ if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
+ ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO]
>> 8) {
+ ata_dev_printk(slave, KERN_WARNING, "is a ghost device,
ignoring.\n");
+ ata_dev_disable(slave);
+ }
+ }
+ return ata_do_set_mode(ap, r_failed_dev);
+}
+
static struct scsi_host_template pcmcia_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
@@ -73,6 +106,7 @@ static struct scsi_host_template pcmcia_
};
static struct ata_port_operations pcmcia_port_ops = {
+ .set_mode = pcmcia_set_mode,
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
_
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
