From: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---
drivers/ata/pata_netcell.c | 31 +++----------------------------
1 file changed, 3 insertions(+), 28 deletions(-)
diff -puN
drivers/ata/pata_netcell.c~pata_netcell-remove-lots-of-crud-by-using-the-cable-method
drivers/ata/pata_netcell.c
---
a/drivers/ata/pata_netcell.c~pata_netcell-remove-lots-of-crud-by-using-the-cable-method
+++ a/drivers/ata/pata_netcell.c
@@ -16,33 +16,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_netcell"
-#define DRV_VERSION "0.1.6"
-
-/**
- * netcell_probe_init - check for 40/80 pin
- * @ap: Port
- *
- * Cables are handled by the RAID controller. Report 80 pin.
- */
-
-static int netcell_pre_reset(struct ata_port *ap)
-{
- ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(ap);
-}
-
-/**
- * netcell_probe_reset - Probe specified port on PATA host controller
- * @ap: Port to probe
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void netcell_error_handler(struct ata_port *ap)
-{
- return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset,
NULL, ata_std_postreset);
-}
+#define DRV_VERSION "0.1.7"
/* No PIO or DMA methods needed for this device */
@@ -81,8 +55,9 @@ static const struct ata_port_operations
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = netcell_error_handler,
+ .error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_80wire,
/* BMDMA handling is PCI ATA format, use helpers */
.bmdma_setup = ata_bmdma_setup,
_
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
