Signed-off-by: Alan Cox <[EMAIL PROTECTED]>

diff -u --new-file --recursive --exclude-from /usr/src/exclude 
linux.vanilla-2.6.21-rc3-mm2/drivers/ata/pata_efar.c 
linux-2.6.21-rc3-mm2/drivers/ata/pata_efar.c
--- linux.vanilla-2.6.21-rc3-mm2/drivers/ata/pata_efar.c        2007-03-08 
16:01:10.000000000 +0000
+++ linux-2.6.21-rc3-mm2/drivers/ata/pata_efar.c        2007-03-08 
17:08:32.000000000 +0000
@@ -22,10 +22,10 @@
 #include <linux/ata.h>
 
 #define DRV_NAME       "pata_efar"
-#define DRV_VERSION    "0.4.3"
+#define DRV_VERSION    "0.4.4"
 
 /**
- *     efar_pre_reset  -       check for 40/80 pin
+ *     efar_pre_reset  -       Enable bits
  *     @ap: Port
  *     @deadline: deadline jiffies for the operation
  *
@@ -41,16 +41,8 @@
        };
 
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-       u8 tmp;
-
        if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
                return -ENOENT;
-
-       pci_read_config_byte(pdev, 0x47, &tmp);
-       if (tmp & (2 >> ap->port_no))
-               ap->cbl = ATA_CBL_PATA40;
-       else
-               ap->cbl = ATA_CBL_PATA80;
        return ata_std_prereset(ap, deadline);
 }
 
@@ -68,6 +60,25 @@
 }
 
 /**
+ *     efar_cable_detect       -       check for 40/80 pin
+ *     @ap: Port
+ *
+ *     Perform cable detection for the EFAR ATA interface. This is
+ *     different to the PIIX arrangement
+ */
+
+static int efar_cable_detect(struct ata_port *ap)
+{
+       struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+       u8 tmp;
+
+       pci_read_config_byte(pdev, 0x47, &tmp);
+       if (tmp & (2 >> ap->port_no))
+               return ATA_CBL_PATA40;
+       return ATA_CBL_PATA80;
+}
+
+/**
  *     efar_set_piomode - Initialize host controller PATA PIO timings
  *     @ap: Port whose timings we are configuring
  *     @adev: um
@@ -257,6 +268,7 @@
        .thaw                   = ata_bmdma_thaw,
        .error_handler          = efar_error_handler,
        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+       .cable_detect           = efar_cable_detect,
 
        .bmdma_setup            = ata_bmdma_setup,
        .bmdma_start            = ata_bmdma_start,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to