Alan Cox wrote:
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_oldpiix.c
linux-2.6.21-rc2-mm2/drivers/ata/pata_oldpiix.c
--- linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_oldpiix.c 2007-03-06
23:09:46.000000000 +0000
+++ linux-2.6.21-rc2-mm2/drivers/ata/pata_oldpiix.c 2007-03-06
23:36:02.000000000 +0000
@@ -25,7 +25,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_oldpiix"
-#define DRV_VERSION "0.5.4"
+#define DRV_VERSION "0.5.5"
/**
* oldpiix_pre_reset - probe begin
@@ -44,7 +44,6 @@
if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
return -ENOENT;
- ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -65,7 +64,7 @@
/**
* oldpiix_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
- * @adev: um
+ * @adev: Device whose timings we are configuring
*
* Set PIO mode for device, in host controller PCI config space.
*
@@ -255,6 +254,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = oldpiix_pata_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
applied, as part of a jumbo ->cable_detect patch, since this patch
contained changes highly similar to others it was applied alongside.
and ditto for the following ->cable_detect patches sent on 03/07/2007:
pata_opti, pata_pcmcia, pata_pdc202xx_old, pata_sil680, pata_triflex,
sata_via, pata_serverworks
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
