On Saturday 03 March 2007, Sergei Shtylyov wrote: > [PATCH] cmd64x: fix recovery time calculation > > The driver wrongly takes the address setup time into account when calculating > the PIO recovery time -- this leads to slight overclocking of the PIO modes 0 > and 1 (so, the prayers failed to help, as usual :-). Rework the code to be > calculating recovery clock count as a difference between the total cycle count > and the active count (we don't need to calculate the recovery time itself > since > it's not specified for the PIO modes 0 to 2, and for modes 3 and 4 this > formula > gives enough recovery time anyway in the chip's supported PCI frequency > range). > > This patch has been inspired by reading the datasheets and looking at what the > libata driver does; it has been compile-tested only (as usual :-) but anyway, > the new code gives the same or longer recovery times than the old one... > > Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]> > Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]> > > --- > This patch has been changed in accordance to the pending reordering as DMA > support removal and addition patches are going to be merged. In addition, > I've put quantize_timing() to its proper place to avoid moving it later...
thanks, I replaced the old patch with this one - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
