When we get an SDB FIS with the 'N' bit set, we should send
an event to user space to indicate that there has been a
media change. The ahci host controller will send the
event via KOBJ_CHANGE uevent.
Signed-off-by: Kristen Carlson Accardi <[EMAIL PROTECTED]>
Index: 2.6-mm/drivers/ata/ahci.c
===================================================================
--- 2.6-mm.orig/drivers/ata/ahci.c
+++ 2.6-mm/drivers/ata/ahci.c
@@ -1164,6 +1164,26 @@ static void ahci_host_intr(struct ata_po
return;
}
+ if (status & PORT_IRQ_SDB_FIS) {
+ /*
+ * if this is an ATAPI device with AN turned on,
+ * then we should interrogate the device to
+ * determine the cause of the interrupt
+ *
+ * for AN - this we should check the SDB FIS
+ * and find the I and N bits set
+ */
+ const u32 *f = pp->rx_fis + RX_FIS_SDB;
+
+ /* check the 'N' bit in word 0 of the FIS */
+ if (f[0] & (1 << 15)) {
+ int port_addr = ((f[0] & 0x00000f00) >> 8);
+ struct ata_device *adev = &ap->device[port_addr];
+ ata_port_printk(ap, KERN_INFO, "N bit set on SDB
FIS!\n");
+ if (adev->flags & ATA_DFLAG_AN)
+ ata_async_notify(adev);
+ }
+ }
if (ap->sactive)
qc_active = readl(port_mmio + PORT_SCR_ACT);
else
Index: 2.6-mm/include/linux/libata.h
===================================================================
--- 2.6-mm.orig/include/linux/libata.h
+++ 2.6-mm/include/linux/libata.h
@@ -492,6 +492,7 @@ struct ata_device {
/* ACPI objects info */
acpi_handle obj_handle;
#endif
+ struct work_struct async_notify;
};
/* Offset into struct ata_device. Fields above it are maintained
@@ -826,6 +827,7 @@ extern void ata_scsi_slave_destroy(struc
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
+extern void ata_async_notify(struct ata_device *atadev);
extern int ata_do_set_mode(struct ata_port *ap, struct ata_device
**r_failed_dev);
extern u8 ata_irq_on(struct ata_port *ap);
extern u8 ata_dummy_irq_on(struct ata_port *ap);
Index: 2.6-mm/drivers/ata/libata-core.c
===================================================================
--- 2.6-mm.orig/drivers/ata/libata-core.c
+++ 2.6-mm/drivers/ata/libata-core.c
@@ -1576,6 +1576,26 @@ static void ata_dev_config_ncq(struct at
snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth);
}
+static void async_notify_thread(struct work_struct *work)
+{
+ struct ata_device *atadev =
+ container_of(work, struct ata_device, async_notify);
+
+ /*
+ * TBD - who should send this event? I couldn't find an
+ * easy way to map an ata_device to a genhd device, so
+ * decided maybe the ata host should send the event and
+ * allow user space to figure out what happened?
+ */
+ kobject_uevent(&atadev->ap->host->dev->kobj, KOBJ_CHANGE);
+}
+
+void ata_async_notify(struct ata_device *atadev)
+{
+ schedule_work(&atadev->async_notify);
+}
+
+
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@@ -1761,6 +1781,7 @@ int ata_dev_configure(struct ata_device
goto err_out_nosup;
}
dev->flags |= ATA_DFLAG_AN;
+ INIT_WORK(&dev->async_notify, async_notify_thread);
}
if (ata_id_cdb_intr(dev->id)) {
@@ -6650,6 +6671,7 @@ EXPORT_SYMBOL_GPL(ata_dummy_irq_on);
EXPORT_SYMBOL_GPL(ata_irq_ack);
EXPORT_SYMBOL_GPL(ata_dummy_irq_ack);
EXPORT_SYMBOL_GPL(ata_dev_try_classify);
+EXPORT_SYMBOL_GPL(ata_async_notify);
EXPORT_SYMBOL_GPL(ata_cable_40wire);
EXPORT_SYMBOL_GPL(ata_cable_80wire);
--
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
