Hi,

On Wednesday 04 April 2007, Olaf Hering wrote:
> 
> The firmware assigns irq 20/21 to the VIA IDE device on Pegasos.
> But the required interrupt is 14/15.
> Maybe someone confused decimal vs. hexadecimal values.

Good to see Pegasos platform being fixed to do the quirk in the proper way.

However I fail to see how via82cxxx will continue to work without some other
modifications to via82cxxx.c or setup-pci.c, namely how will hwif->irq be
assigned with correct values?

AFAICS:
* via82cxxx.c:init_chipset_via82cxxx() returns '0' instead of 'dev->irq'
  (won't help anyway since chipset is in legacy mode using IRQs 14 and 15)
* on CHRP platform there is no ppc_ide_md.ide_default_irq
* IRQ probing (used by ide-probe.c as a last resort) is unsupported on PPC

therefore hwif->irq won't be set et all after removing quirk from via82cxxx.c

?

Thanks,
Bart

> Signed-off-by: Olaf Hering <[EMAIL PROTECTED]>
> 
> ---
>  arch/powerpc/kernel/prom_init.c |   55 
> ++++++++++++++++++++++++----------------
>  drivers/ide/pci/via82cxxx.c     |   11 --------
>  2 files changed, 33 insertions(+), 33 deletions(-)
> 
> Index: b/arch/powerpc/kernel/prom_init.c
> ===================================================================
> --- a/arch/powerpc/kernel/prom_init.c
> +++ b/arch/powerpc/kernel/prom_init.c
> @@ -2035,39 +2035,50 @@ static void __init fixup_device_tree_map
>  #endif
>  
>  #ifdef CONFIG_PPC_CHRP
> -/* Pegasos and BriQ lacks the "ranges" property in the isa node */
> +/*
> + * Pegasos and BriQ lacks the "ranges" property in the isa node
> + * Pegasos needs decimal IRQ 14/15, not hexadecimal
> + */
>  static void __init fixup_device_tree_chrp(void)
>  {
> -     phandle isa;
> -     u32 isa_ranges[6];
> +     phandle ph;
> +     u32 prop[6];
>       u32 rloc = 0x01006000; /* IO space; PCI device = 12 */
>       char *name;
>       int rc;
>  
>       name = "/[EMAIL PROTECTED]/[EMAIL PROTECTED]";
> -     isa = call_prom("finddevice", 1, 1, ADDR(name));
> -     if (!PHANDLE_VALID(isa)) {
> +     ph = call_prom("finddevice", 1, 1, ADDR(name));
> +     if (!PHANDLE_VALID(ph)) {
>               name = "/[EMAIL PROTECTED]/[EMAIL PROTECTED]";
> -             isa = call_prom("finddevice", 1, 1, ADDR(name));
> +             ph = call_prom("finddevice", 1, 1, ADDR(name));
>               rloc = 0x01003000; /* IO space; PCI device = 6 */
>       }
> -     if (!PHANDLE_VALID(isa))
> -             return;
> -
> -     rc = prom_getproplen(isa, "ranges");
> -     if (rc != 0 && rc != PROM_ERROR)
> -             return;
> -
> -     prom_printf("Fixing up missing ISA range on Pegasos...\n");
> +     if (PHANDLE_VALID(ph)) {
> +             rc = prom_getproplen(ph, "ranges");
> +             if (rc == 0 || rc == PROM_ERROR) {
> +                     prom_printf("Fixing up missing ISA range on 
> Pegasos...\n");
> +
> +                     prop[0] = 0x1;
> +                     prop[1] = 0x0;
> +                     prop[2] = rloc;
> +                     prop[3] = 0x0;
> +                     prop[4] = 0x0;
> +                     prop[5] = 0x00010000;
> +                     prom_setprop(ph, name, "ranges", prop, sizeof(prop));
> +             }
> +     }
>  
> -     isa_ranges[0] = 0x1;
> -     isa_ranges[1] = 0x0;
> -     isa_ranges[2] = rloc;
> -     isa_ranges[3] = 0x0;
> -     isa_ranges[4] = 0x0;
> -     isa_ranges[5] = 0x00010000;
> -     prom_setprop(isa, name, "ranges",
> -                     isa_ranges, sizeof(isa_ranges));
> +     name = "/[EMAIL PROTECTED]/[EMAIL PROTECTED],1";
> +     ph = call_prom("finddevice", 1, 1, ADDR(name));
> +     if (PHANDLE_VALID(ph)) {
> +             prom_printf("Fixing up IDE interrupt on Pegasos...\n");
> +             prop[0] = 14;
> +             prop[1] = 0x0;
> +             prop[2] = 15;
> +             prop[3] = 0x0;
> +             prom_setprop(ph, name, "interrupts", prop, 4*sizeof(u32));
> +     }
>  }
>  #else
>  #define fixup_device_tree_chrp()
> Index: b/drivers/ide/pci/via82cxxx.c
> ===================================================================
> --- a/drivers/ide/pci/via82cxxx.c
> +++ b/drivers/ide/pci/via82cxxx.c
> @@ -35,10 +35,6 @@
>  #include <linux/ide.h>
>  #include <asm/io.h>
>  
> -#ifdef CONFIG_PPC_CHRP
> -#include <asm/processor.h>
> -#endif
> -
>  #include "ide-timing.h"
>  
>  #define DISPLAY_VIA_TIMINGS
> @@ -436,13 +432,6 @@ static void __devinit init_hwif_via82cxx
>       hwif->tuneproc = &via82cxxx_tune_drive;
>       hwif->speedproc = &via_set_drive;
>  
> -
> -#ifdef CONFIG_PPC_CHRP
> -     if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
> -             hwif->irq = hwif->channel ? 15 : 14;
> -     }
> -#endif
> -
>       for (i = 0; i < 2; i++) {
>               hwif->drives[i].io_32bit = 1;
>               hwif->drives[i].unmask = (vdev->via_config->flags & 
> VIA_NO_UNMASK) ? 0 : 1;
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to