On Saturday 14 April 2007, Sergei Shtylyov wrote: > Fix several issues with the driver's procfs output: > > - when testing if channel is enabled, the code looks at the "simplex" bits, > not > at the real enable bits -- add #define for the primary channel enable bit; > > - UltraDMA modes 0, 1, 3 for slave drive reported incorrectly due to using the > master drive's clock cycle resolution bit. > > While at it, also perform the following cleanups: > > - don't print extra newline before the first controller's dump; > > - correct the chipset names (from CMDxxx to PCI-xxx) > > - don't read from the registers which aren't used for dump; > > - better align the table column sizes; > > - rework UltraDMA mode dump code; > > - remove PIO mode dump code that has never been finished; > > - remove the duplicate interrupt status (the MRDMODE register bits mirror > those > those in the CFR and ARTTIM23 registers) and fold the dump into single line; > > - correct the style of the ?: operators... > > Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]> > > --- > This version fixes an issue with the channel enable misreporting in the older > patch, adds workaround for missing primary channel enable bit on PCI0643/6, > and > also beuatifies the overall table format. Has been tested on PCI-649 as well.
applied - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
