Saw that popping up in my log today on a brand new T61 thinkpad:
[ 427.712000] ata1.00: exception Emask 0x2 SAct 0x18 SErr 0x0 action 0x2 frozen
[ 427.712000] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x18
FIS=004040a1:00000024)
[ 427.712000] ata1.00: cmd 61/08:18:f4:74:54/00:00:04:00:00/40 tag 3 cdb 0x0
data 4096 out
[ 427.712000] res 40/00:28:64:e4:51/00:00:04:00:00/40 Emask 0x2 (HSM
violation)
[ 427.712000] ata1.00: cmd 61/08:20:84:10:81/00:00:04:00:00/40 tag 4 cdb 0x0
data 4096 out
[ 427.712000] res 40/00:28:64:e4:51/00:00:04:00:00/40 Emask 0x2 (HSM
violation)
[ 428.024000] ata1: soft resetting port
[ 428.196000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 428.204000] ata1.00: configured for UDMA/100
[ 428.204000] ata1: EH complete
[ 428.204000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 428.204000] sd 0:0:0:0: [sda] Write Protect is off
[ 428.204000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 428.204000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
Kernel recovered just fine and things seem smooth so far. Is that something I
need
to worry about ?
Kernel is ubuntu gutsy's 2.6.22 and controller is:
Cheers,00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E)
SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Unknown device 20a7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 218
Region 0: I/O ports at 1c50 [size=8]
Region 1: I/O ports at 1c44 [size=4]
Region 2: I/O ports at 1c48 [size=8]
Region 3: I/O ports at 1c40 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fe226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2
Enable+
Address: fee0300c Data: 4152
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] #12 [0010]
Cheers,
Ben.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
