The TRM-290 chip is *not* SFF-8038i compatible and therefore can *not* call
ide_setup_dma() -- fix this and also cleanup the code a bit...
Signed-off-by: Sergei Shtylyov <[EMAIL PROTECTED]>
drivers/ide/ide-dma.c | 13 ++++-----
drivers/ide/pci/trm290.c | 62 ++++++++++++++++++++++++++++-------------------
2 files changed, 43 insertions(+), 32 deletions(-)
Index: linux-2.6/drivers/ide/ide-dma.c
===================================================================
--- linux-2.6.orig/drivers/ide/ide-dma.c
+++ linux-2.6/drivers/ide/ide-dma.c
@@ -935,6 +935,8 @@ static int ide_dma_iobase(ide_hwif_t *hw
void ide_setup_dma(ide_hwif_t *hwif, unsigned long base, unsigned num_ports)
{
+ u8 dma_stat;
+
if (ide_dma_iobase(hwif, base, num_ports))
return;
@@ -973,13 +975,10 @@ void ide_setup_dma(ide_hwif_t *hwif, uns
if (!hwif->dma_lost_irq)
hwif->dma_lost_irq = &ide_dma_lost_irq;
- if (hwif->chipset != ide_trm290) {
- u8 dma_stat = hwif->INB(hwif->dma_status);
- printk(", BIOS settings: %s:%s, %s:%s",
- hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "pio",
- hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "pio");
- }
- printk("\n");
+ dma_stat = hwif->INB(hwif->dma_status);
+ printk(KERN_CONT ", BIOS settings: %s:%s, %s:%s\n",
+ hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "PIO",
+ hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "PIO");
}
EXPORT_SYMBOL_GPL(ide_setup_dma);
Index: linux-2.6/drivers/ide/pci/trm290.c
===================================================================
--- linux-2.6.orig/drivers/ide/pci/trm290.c
+++ linux-2.6/drivers/ide/pci/trm290.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/trm290.c Version 1.05 Dec. 26, 2007
+ * linux/drivers/ide/pci/trm290.c Version 1.05 Dec. 30, 2007
*
* Copyright (c) 1997-1998 Mark Lord
* Copyright (c) 2007 MontaVista Software, Inc. <[EMAIL PROTECTED]>
@@ -209,10 +209,10 @@ static int trm290_dma_setup(ide_drive_t
}
/* select DMA xfer */
trm290_prepare_drive(drive, 1);
- outl(hwif->dmatable_dma | rw, hwif->dma_command);
+ outl(hwif->dmatable_dma | rw, hwif->dma_base);
drive->waiting_for_dma = 1;
/* start DMA */
- outw((count * 2) - 1, hwif->dma_status);
+ outw(count * 2 - 1, hwif->dma_base + 2);
return 0;
}
@@ -222,23 +222,21 @@ static void trm290_dma_start(ide_drive_t
static int trm290_ide_dma_end (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u16 status = 0;
+ u16 status;
drive->waiting_for_dma = 0;
/* purge DMA mappings */
ide_destroy_dmatable(drive);
- status = inw(hwif->dma_status);
- return (status != 0x00ff);
+ status = inw(HWIF(drive)->dma_base + 2);
+ return status != 0x00ff;
}
static int trm290_ide_dma_test_irq (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u16 status = 0;
+ u16 status;
- status = inw(hwif->dma_status);
- return (status == 0x00ff);
+ status = inw(HWIF(drive)->dma_base + 2);
+ return status == 0x00ff;
}
static void trm290_dma_host_set(ide_drive_t *drive, int on)
@@ -247,21 +245,37 @@ static void trm290_dma_host_set(ide_driv
static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
{
- unsigned int cfgbase = 0;
+ struct pci_dev *dev = hwif->pci_dev;
+ unsigned int cfg_base = pci_resource_start(dev, 4);
unsigned long flags;
u8 reg = 0;
- struct pci_dev *dev = hwif->pci_dev;
- cfgbase = pci_resource_start(dev, 4);
- if ((dev->class & 5) && cfgbase) {
- hwif->config_data = cfgbase;
- printk(KERN_INFO "TRM290: chip config base at 0x%04lx\n",
- hwif->config_data);
- } else {
- hwif->config_data = 0x3df0;
- printk(KERN_INFO "TRM290: using default config base at
0x%04lx\n",
- hwif->config_data);
+ if ((dev->class & 5) && cfg_base)
+ printk(KERN_INFO "TRM290: chip");
+ else {
+ cfg_base = 0x3df0;
+ printk(KERN_INFO "TRM290: using default");
+ }
+ printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
+ hwif->config_data = cfg_base;
+ hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0);
+
+ printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx",
+ hwif->name, hwif->dma_base, hwif->dma_base + 3);
+
+ if (!request_region(hwif->dma_base, 4, hwif->name)) {
+ printk(KERN_CONT " -- Error, ports in use.\n");
+ return;
+ }
+
+ hwif->dmatable_cpu = pci_alloc_consistent(dev, PRD_ENTRIES * PRD_BYTES,
+ &hwif->dmatable_dma);
+ if (!hwif->dmatable_cpu) {
+ printk(KERN_CONT " -- Error, unable to allocate DMA table.\n");
+ release_region(hwif->dma_base, 4);
+ return;
}
+ printk(KERN_CONT "\n");
local_irq_save(flags);
/* put config reg into first byte of hwif->select_data */
@@ -276,15 +290,13 @@ static void __devinit init_hwif_trm290(i
outb(reg, hwif->config_data + 3);
local_irq_restore(flags);
- if ((reg & 0x10))
+ if (reg & 0x10)
/* legacy mode */
hwif->irq = hwif->channel ? 15 : 14;
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
/* sharing IRQ with mate */
hwif->irq = hwif->mate->irq;
- ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 :
0x0000), 3);
-
hwif->dma_host_set = &trm290_dma_host_set;
hwif->dma_setup = &trm290_dma_setup;
hwif->dma_exec_cmd = &trm290_dma_exec_cmd;
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
