On Sa, 05 Jan 2008, Volker Sauer <[EMAIL PROTECTED]> wrote: > I'm running a Promise Technology PDC20318 (SATA150 TX4) (rev 02) > controller in on of my servers and I gettig the following error from time > to time - espacially when there's high load on the disks:
[...]
> /dev/sda: Seagate ST3250620AS
> /dev/sdb: Hitachi HDS722525VLSA80
> /dev/sdc: Seagate ST3250620AS
> /dev/sdd: Hitachi HDS722525VLSA80
Hi,
now I got an error from sdb, too:
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
ata4.00: port_status 0x20200000
ata4.00: cmd 35/00:f8:b5:35:95/00:03:02:00:00/e0 tag 0 dma 520192 out
res 51/84:00:ac:39:95/84:00:02:00:00/e2 Emask 0x10 (ATA bus error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { ICRC ABRT }
ata4: soft resetting link
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: configured for UDMA/100
ata4: EH complete
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
I built the latest smartmontools which can query SATA disks and get:
/dev/sda: ATA Error Count: 0
/dev/sdb: ATA Error Count: 16
/dev/sdc: ATA Error Count: 0
/dev/sdd: ATA Error Count: 33
I'm thinking about replacing the Hitachi disks by 2 Seagate
ST3250620AS.....
Any comments on this?
Regards
Volker
signature.asc
Description: Digital signature
