This is Palmchip BK3710 IDE controller support for kernel version 2.6.24-rc8.
The IDE controller logic supports PIO, multiword DMA and ultra-DMA modes.
Supports interface to compact Flash (CF) configured in True-IDE mode.

Use ide_setup_dma() since BLK_DEV_PALMCHIP_BK3710 selects BLK_DEV_IDEDMA_PCI
So I deleted exports from ide-dma.c

Signed-off-by: Anton Salnikov <[EMAIL PROTECTED]>
---

 drivers/ide/Kconfig           |    8 
 drivers/ide/arm/Makefile      |    1 
 drivers/ide/arm/palm_bk3710.c |  434 ++++++++++++++++++++++++++++++++++++++++++
 drivers/ide/ide-proc.c        |    1 
 include/linux/ide.h           |    2 
 5 files changed, 445 insertions(+), 1 deletion(-)

Index: 2.6.24-rc8.ide/drivers/ide/Kconfig
===================================================================
--- 2.6.24-rc8.ide.orig/drivers/ide/Kconfig
+++ 2.6.24-rc8.ide/drivers/ide/Kconfig
@@ -1008,6 +1008,14 @@ config BLK_DEV_Q40IDE
          normally be on; disable it only if you are running a custom hard
          drive subsystem through an expansion card.
 
+config BLK_DEV_PALMCHIP_BK3710
+       bool "Palmchip bk3710 IDE controller support"
+       depends on ARCH_DAVINCI
+       select BLK_DEV_IDEDMA_PCI
+       help
+         Say Y here if you want to support the onchip IDE controller on the
+         TI DaVinci SoC
+
 config BLK_DEV_MPC8xx_IDE
        bool "MPC8xx IDE support"
        depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && 
BLK_DEV_IDE=y && !PPC_MERGE
Index: 2.6.24-rc8.ide/drivers/ide/arm/Makefile
===================================================================
--- 2.6.24-rc8.ide.orig/drivers/ide/arm/Makefile
+++ 2.6.24-rc8.ide/drivers/ide/arm/Makefile
@@ -2,5 +2,6 @@
 obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)       += icside.o
 obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)       += rapide.o
 obj-$(CONFIG_BLK_DEV_IDE_BAST)         += bast-ide.o
+obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)  += palm_bk3710.o
 
 EXTRA_CFLAGS   := -Idrivers/ide
Index: 2.6.24-rc8.ide/drivers/ide/arm/palm_bk3710.c
===================================================================
--- /dev/null
+++ 2.6.24-rc8.ide/drivers/ide/arm/palm_bk3710.c
@@ -0,0 +1,434 @@
+/*
+ * Palmchip bk3710 IDE controller
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software, Inc., <[EMAIL PROTECTED]>
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/* Offset of the primary interface registers */
+#define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0
+
+/* Primary Control Offset */
+#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
+
+/*
+ * PalmChip 3710 IDE Controller UDMA timing structure Definition
+ */
+struct palm_bk3710_udmatiming {
+       unsigned int rptime;    /* Ready to pause time  */
+       unsigned int cycletime; /* Cycle Time           */
+};
+
+#define BK3710_BMICP           0x00
+#define BK3710_BMISP           0x02
+#define BK3710_BMIDTP          0x04
+#define BK3710_BMICS           0x08
+#define BK3710_BMISS           0x0A
+#define BK3710_BMIDTS          0x0C
+#define BK3710_IDETIMP         0x40
+#define BK3710_IDETIMS         0x42
+#define BK3710_SIDETIM         0x44
+#define BK3710_SLEWCTL         0x45
+#define BK3710_IDESTATUS       0x47
+#define BK3710_UDMACTL         0x48
+#define BK3710_UDMATIM         0x4A
+#define BK3710_MISCCTL         0x50
+#define BK3710_REGSTB          0x54
+#define BK3710_REGRCVR         0x58
+#define BK3710_DATSTB          0x5C
+#define BK3710_DATRCVR         0x60
+#define BK3710_DMASTB          0x64
+#define BK3710_DMARCVR         0x68
+#define BK3710_UDMASTB         0x6C
+#define BK3710_UDMATRP         0x70
+#define BK3710_UDMAENV         0x74
+#define BK3710_IORDYTMP                0x78
+#define BK3710_IORDYTMS                0x7C
+
+#include "../ide-timing.h"
+
+static long ide_palm_clk;
+static u32 base;
+
+static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
+       {160, 240},             /* UDMA Mode 0 */
+       {125, 160},             /* UDMA Mode 1 */
+       {100, 120},             /* UDMA Mode 2 */
+       {100, 90},              /* UDMA Mode 3 */
+       {85,  60},              /* UDMA Mode 4 */
+};
+
+static struct clk *ideclkp;
+
+static inline u32 ioread(u32 reg)
+{
+       return ioread32(base + reg);
+}
+
+static inline void iowrite(u32 val, u32 reg)
+{
+       iowrite32(val, base + reg);
+}
+
+static void palm_bk3710_setudmamode(unsigned int dev, unsigned int mode)
+{
+       u8 tenv, trp, t0;
+       u32 val;
+
+       /* DMA Data Setup */
+       t0 = (palm_bk3710_udmatimings[mode].cycletime + ide_palm_clk - 1)
+                       / ide_palm_clk - 1;
+       tenv = (20 + ide_palm_clk - 1) / ide_palm_clk - 1;
+       trp = (palm_bk3710_udmatimings[mode].rptime + ide_palm_clk - 1)
+                       / ide_palm_clk - 1;
+
+       /* udmatim Register */
+       val = ioread(BK3710_UDMATIM) & ((!dev) ? 0xFFF0 : 0xFF0F);
+       iowrite(val, BK3710_UDMATIM);
+       val = ioread(BK3710_UDMATIM) | (mode << ((!dev) ? 0 : 4));
+       iowrite(val, BK3710_UDMATIM);
+
+       /* udmastb Ultra DMA Access Strobe Width */
+       val = ioread(BK3710_UDMASTB) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_UDMASTB);
+       val = ioread(BK3710_UDMASTB) | (t0 << (dev << 4));
+       iowrite(val, BK3710_UDMASTB);
+
+       /* udmatrp Ultra DMA Ready to Pause Time */
+       val = ioread(BK3710_UDMATRP) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_UDMATRP);
+       val = ioread(BK3710_UDMATRP) | (trp << (dev << 4));
+       iowrite(val, BK3710_UDMATRP);
+
+       /* udmaenv Ultra DMA envelop Time */
+       val = ioread(BK3710_UDMAENV) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_UDMAENV);
+       val = ioread(BK3710_UDMAENV) | (tenv << (dev << 4));
+       iowrite(val, BK3710_UDMAENV);
+
+       /* Enable UDMA for Device */
+       val = ioread(BK3710_UDMACTL) | (1 << dev);
+       iowrite(val, BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setdmamode(unsigned int dev, unsigned int cycletime,
+                                 unsigned int mode)
+{
+       u8 td, tkw, t0;
+       u32 val;
+
+       if (cycletime < ide_timing[mode].cycle)
+               cycletime = ide_timing[mode].cycle;
+
+       /* DMA Data Setup */
+       t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk;
+       td = (ide_timing_find_mode(mode)->active + ide_palm_clk - 1)
+                       / ide_palm_clk;
+       tkw = t0 - td - 1;
+       td -= 1;
+
+       val = ioread(BK3710_DMASTB) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_DMASTB);
+       val = ioread(BK3710_DMASTB) | (td << (dev << 4));
+       iowrite(val, BK3710_DMASTB);
+
+       val = ioread(BK3710_DMARCVR) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_DMARCVR);
+       val = ioread(BK3710_DMARCVR) | (tkw << (dev << 4));
+       iowrite(val, BK3710_DMARCVR);
+
+       /* Disable UDMA for Device */
+       val = ioread(BK3710_UDMACTL) & (0xFF00 | (1 << (!dev)));
+       iowrite(val, BK3710_UDMACTL);
+}
+
+static void palm_bk3710_setpiomode(ide_drive_t *mate, unsigned int dev,
+                                 unsigned int cycletime, unsigned int mode)
+{
+       u8 t2, t2i, t0;
+       u32 val;
+       struct ide_timing *t;
+
+       /* PIO Data Setup */
+       t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk;
+       t2 = (ide_timing_find_mode(XFER_PIO_0 + mode)->active + ide_palm_clk - 
1)
+                       / ide_palm_clk;
+
+       t2i = t0 - t2 - 1;
+       t2 -= 1;
+
+       val = ioread(BK3710_DATSTB) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_DATSTB);
+       val = ioread(BK3710_DATSTB) | (t2 << (dev << 4));
+       iowrite(val, BK3710_DATSTB);
+
+       val = ioread(BK3710_DATRCVR) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_DATRCVR);
+       val = ioread(BK3710_DATRCVR) | (t2i << (dev << 4));
+       iowrite(val, BK3710_DATRCVR);
+
+       if (mate && mate->present) {
+               u8 mode2 = ide_get_best_pio_mode(mate, 255, 4);
+
+               if (mode2 < mode)
+                       mode = mode2;
+       }
+
+       /* TASKFILE Setup */
+       t = ide_timing_find_mode(XFER_PIO_0 + mode);
+       t0 = (t->cyc8b + ide_palm_clk - 1)
+                       / ide_palm_clk;
+       t2 = (t->act8b + ide_palm_clk - 1)
+                       / ide_palm_clk;
+
+       t2i = t0 - t2 - 1;
+       t2 -= 1;
+
+       val = ioread(BK3710_REGSTB) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_REGSTB);
+       val = ioread(BK3710_REGSTB) | (t2 << (dev << 4));
+       iowrite(val, BK3710_REGSTB);
+
+       val = ioread(BK3710_REGRCVR) & (0xFF << ((!dev) << 4));
+       iowrite(val, BK3710_REGRCVR);
+       val = ioread(BK3710_REGRCVR) | (t2i << (dev << 4));
+       iowrite(val, BK3710_REGRCVR);
+}
+
+static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
+{
+       int is_slave = drive->dn & 1;
+
+       if (xferspeed >= XFER_UDMA_0) {
+               palm_bk3710_setudmamode(is_slave, xferspeed - XFER_UDMA_0);
+       } else {
+               int nspeed = 10 - xferspeed + XFER_MW_DMA_0;
+               unsigned ide_cycle = max_t(int, ide_timing[nspeed].cycle,
+                                          drive->id->eide_dma_min);
+
+               palm_bk3710_setdmamode(is_slave, ide_cycle, nspeed);
+       }
+}
+
+static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
+{
+       unsigned int cycle_time;
+       int is_slave = drive->dn & 1;
+       ide_drive_t *mate;
+
+       /*
+        * Obtain the drive PIO data for tuning the Palm Chip registers
+        */
+       cycle_time = ide_pio_cycle_time(drive, pio);
+       mate = ide_get_paired_drive(drive);
+       palm_bk3710_setpiomode(mate, is_slave, cycle_time, pio);
+}
+
+static void __devinit palm_bk3710_chipinit(void)
+{
+       /*
+        * enable the reset_en of ATA controller so that when ata signals
+        * are brought out, by writing into device config. at that
+        * time por_n signal should not be 'Z' and have a stable value.
+        */
+       iowrite(0x0300, BK3710_MISCCTL);
+
+       /* wait for some time and deassert the reset of ATA Device. */
+       mdelay(100);
+
+       /* Deassert the Reset */
+       iowrite(0x0200, BK3710_MISCCTL);
+
+       /*
+        * Program the IDETIMP Register Value based on the following assumptions
+        *
+        * (ATA_IDETIMP_IDEEN           , ENABLE ) |
+        * (ATA_IDETIMP_SLVTIMEN        , DISABLE) |
+        * (ATA_IDETIMP_RDYSMPL         , 70NS)    |
+        * (ATA_IDETIMP_RDYRCVRY        , 50NS)    |
+        * (ATA_IDETIMP_DMAFTIM1        , PIOCOMP) |
+        * (ATA_IDETIMP_PREPOST1        , DISABLE) |
+        * (ATA_IDETIMP_RDYSEN1         , DISABLE) |
+        * (ATA_IDETIMP_PIOFTIM1        , DISABLE) |
+        * (ATA_IDETIMP_DMAFTIM0        , PIOCOMP) |
+        * (ATA_IDETIMP_PREPOST0        , DISABLE) |
+        * (ATA_IDETIMP_RDYSEN0         , DISABLE) |
+        * (ATA_IDETIMP_PIOFTIM0        , DISABLE)
+        */
+       iowrite(0xB388, BK3710_IDETIMP);
+
+       /*
+        * Configure  SIDETIM  Register
+        * (ATA_SIDETIM_RDYSMPS1        ,120NS ) |
+        * (ATA_SIDETIM_RDYRCYS1        ,120NS )
+        */
+       iowrite(0, BK3710_SIDETIM);
+
+       /*
+        * UDMACTL Ultra-ATA DMA Control
+        * (ATA_UDMACTL_UDMAP1  , 0 ) |
+        * (ATA_UDMACTL_UDMAP0  , 0 )
+        *
+        */
+       iowrite(0, BK3710_UDMACTL);
+
+       /*
+        * MISCCTL Miscellaneous Conrol Register
+        * (ATA_MISCCTL_RSTMODEP        , 1) |
+        * (ATA_MISCCTL_RESETP          , 0) |
+        * (ATA_MISCCTL_TIMORIDE        , 1)
+        */
+       iowrite(0x201, BK3710_MISCCTL);
+
+       /*
+        * IORDYTMP IORDY Timer for Primary Register
+        * (ATA_IORDYTMP_IORDYTMP     , 0xffff  )
+        */
+       iowrite(0xFFFF, BK3710_IORDYTMP);
+
+       /*
+        * Configure BMISP Register
+        * (ATA_BMISP_DMAEN1    , DISABLE )     |
+        * (ATA_BMISP_DMAEN0    , DISABLE )     |
+        * (ATA_BMISP_IORDYINT  , CLEAR)        |
+        * (ATA_BMISP_INTRSTAT  , CLEAR)        |
+        * (ATA_BMISP_DMAERROR  , CLEAR)
+        */
+       iowrite(0, BK3710_BMISP);
+
+       palm_bk3710_setpiomode(NULL, 0, 600, 0);
+       palm_bk3710_setpiomode(NULL, 1, 600, 0);
+}
+
+static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+{
+       hw_regs_t ide_ctlr_info;
+       int index = 0;
+       int pribase;
+       struct clk *clkp;
+       struct resource *mem, *irq;
+       ide_hwif_t *hwif;
+
+       clkp = clk_get(NULL, "IDECLK");
+       if (IS_ERR(clkp))
+               return -ENODEV;
+
+       ideclkp = clkp;
+       clk_enable(ideclkp);
+       ide_palm_clk = clk_get_rate(ideclkp)/100000;
+       ide_palm_clk = (10000/ide_palm_clk) + 1;
+       /* Register the IDE interface with Linux ATA Interface */
+       memset(&ide_ctlr_info, 0, sizeof(ide_ctlr_info));
+
+       mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (mem == NULL) {
+               printk(KERN_INFO "failed to get memory region resource\n");
+               return -ENODEV;
+       }
+       irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       if (irq == NULL) {
+               printk(KERN_INFO "failed to get IRQ resource\n");
+               return -ENODEV;
+       }
+
+       base = mem->start;
+       /* Configure the Palm Chip controller */
+       palm_bk3710_chipinit();
+
+       pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET;
+       for (index = 0; index < IDE_NR_PORTS - 2; index++)
+               ide_ctlr_info.io_ports[index] = pribase + index;
+       ide_ctlr_info.io_ports[IDE_CONTROL_OFFSET] = mem->start +
+                       IDE_PALM_ATA_PRI_CTL_OFFSET;
+       ide_ctlr_info.irq = irq->start;
+       ide_ctlr_info.chipset = ide_palm3710;
+
+       if (!request_region(mem->start, 8, "palm_bk3710")) {
+               printk(KERN_ERR "Error, ports in use.\n");
+               return -EBUSY;
+       }
+
+       if (ide_register_hw(&ide_ctlr_info, NULL, 0, &hwif) < 0) {
+               printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
+               return -ENODEV;
+       }
+
+       hwif->set_pio_mode = &palm_bk3710_set_pio_mode;
+       hwif->set_dma_mode = &palm_bk3710_set_dma_mode;
+       hwif->mmio = 1;
+       hwif->ultra_mask = 0x1f;        /* Ultra DMA Mode 4 Max
+                                               (input clk 99MHz) */
+       hwif->mwdma_mask = 0x7;
+       hwif->drives[0].autotune = 1;
+       hwif->drives[1].autotune = 1;
+
+       hwif->dmatable_cpu = dma_alloc_coherent(
+                               NULL,
+                               PRD_ENTRIES * PRD_BYTES,
+                               &hwif->dmatable_dma,
+                               GFP_ATOMIC);
+
+       if (!hwif->dmatable_cpu) {
+               printk(KERN_ERR "Error, unable to allocate DMA table.\n");
+               hwif->ultra_mask = 0;
+               hwif->mwdma_mask = 0;
+               return 0;
+       }
+
+       hwif->dma_base = mem->start;
+
+       hwif->dma_master = mem->start;
+
+       hwif->dma_command = mem->start;
+       hwif->dma_status = mem->start + 2;
+       hwif->dma_prdtable = mem->start + 4;
+       ide_setup_dma(hwif, mem->start, 8);
+
+       return 0;
+}
+
+static struct platform_driver platform_bk_driver = {
+       .driver = {
+               .name = "palm_bk3710",
+       },
+       .probe = palm_bk3710_probe,
+       .remove = NULL,
+};
+
+static int __init palm_bk3710_init(void)
+{
+       return platform_driver_register(&platform_bk_driver);
+}
+
+module_init(palm_bk3710_init);
+MODULE_LICENSE("GPL");
+
Index: 2.6.24-rc8.ide/drivers/ide/ide-proc.c
===================================================================
--- 2.6.24-rc8.ide.orig/drivers/ide/ide-proc.c
+++ 2.6.24-rc8.ide/drivers/ide/ide-proc.c
@@ -67,6 +67,7 @@ static int proc_ide_read_imodel
                case ide_4drives:       name = "4drives";       break;
                case ide_pmac:          name = "mac-io";        break;
                case ide_au1xxx:        name = "au1xxx";        break;
+               case ide_palm3710:      name = "palm3710";      break;
                case ide_etrax100:      name = "etrax100";      break;
                case ide_acorn:         name = "acorn";         break;
                default:                name = "(unknown)";     break;
Index: 2.6.24-rc8.ide/include/linux/ide.h
===================================================================
--- 2.6.24-rc8.ide.orig/include/linux/ide.h
+++ 2.6.24-rc8.ide/include/linux/ide.h
@@ -202,7 +202,7 @@ enum {              ide_unknown,    ide_generic,    ide_pc
                ide_rz1000,     ide_trm290,
                ide_cmd646,     ide_cy82c693,   ide_4drives,
                ide_pmac,       ide_etrax100,   ide_acorn,
-               ide_au1xxx, ide_forced
+               ide_au1xxx,     ide_palm3710,   ide_forced
 };
 
 typedef u8 hwif_chipset_t;
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to