>-----Original Message-----
>From: Jeff Garzik [mailto:[EMAIL PROTECTED]
>Sent: Tuesday, January 29, 2008 9:14 AM
>To: Gaston, Jason D
>Cc: linux-ide@vger.kernel.org; [EMAIL PROTECTED];
>[EMAIL PROTECTED]
>Subject: Re: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel
ICH10
>DeviceID's
>
>Jason Gaston wrote:
>> This patch adds the Intel ICH10 IDE mode SATA Controller DeviceID's.
>>
>> Signed-off-by:  Jason Gaston <[EMAIL PROTECTED]>
>>
>> --- linux-2.6.24/drivers/ata/ata_piix.c.orig 2008-01-24
>14:58:37.000000000 -0800
>> +++ linux-2.6.24/drivers/ata/ata_piix.c      2008-01-28
14:58:22.000000000 -
>0800
>> @@ -263,6 +263,14 @@
>>      { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>>      /* SATA Controller IDE (Tolapai) */
>>      { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
tolapai_sata_ahci },
>> +    /* SATA Controller IDE (ICH10) */
>> +    { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> +    /* SATA Controller IDE (ICH10) */
>> +    { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata
},
>> +    /* SATA Controller IDE (ICH10) */
>> +    { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci
},
>> +    /* SATA Controller IDE (ICH10) */
>> +    { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata
},
>
>can these do AHCI mode without losing any PATA ports?
>
>if so, I would prefer to always drive the hardware in AHCI mode, if it
>is capable of doing so.

They do not have PATA.

Jason


-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to