On Mon 11. Feb - 11:37:15, Tejun Heo wrote:
> Hello,
>
> Holger Macht wrote:
> > Calling ap->ops->set_piomode(ap, dev) on a device/controller which got
> > already removed, locks the system hard. Reproducibly on an X60 attached to
> > a dock station containing a cdrom device with doing
> >
> > $ echo 1 > /sys/devices/platform/dock.0/undock && echo 123 > /dev/sr0
> >
> > This calls ata_eh_reset(...) which in turn tries to force PIO mode 0. But
> > the device is already gone.
> >
> > Bisecting revealed the following commit as culprit:
> >
> > commit cdeab1140799f09c5f728a5ff85e0bdfa5679cd2
> > Author: Tejun Heo <[EMAIL PROTECTED]>
> > Date: Mon Oct 29 16:41:09 2007 +0900
> >
> > libata: relocate forcing PIO0 on reset
> >
> > Forcing PIO0 on reset was done inside ata_bus_softreset(), which is a
> > bit out of place as it should be applied to all resets - hard, soft
> > and implementation which don't use ata_bus_softreset(). Relocate it
> > such that...
> >
> > * For new EH, it's done in ata_eh_reset() before calling prereset.
> >
> > * For old EH, it's done before calling ap->ops->phy_reset() in
> > ata_bus_probe().
> >
> > This makes PIO0 forced after all resets. Another difference is that
> > reset itself is done after PIO0 is forced.
> >
> > Signed-off-by: Tejun Heo <[EMAIL PROTECTED]>
> > Acked-by: Alan Cox <[EMAIL PROTECTED]>
> > Signed-off-by: Jeff Garzik <[EMAIL PROTECTED]>
> >
> >
> > ATTENTION! The following patch solves the problem on my system, but please
> > be aware that I don't really know what I'm doing because I don't have the
> > big picture. There's surely a better way to check if the device/controller
> > is still functional than calling ata_link_{online,offline}.
>
> In the above example, even the reset sequence itself can cause hang if
> the hardware is implemented slightly differently. The reason why
> set_piomode() locks up but reset sequence doesn't is simple dumb luck.
Another thing, whether it's poor luck or not, it worked like this than at
least 2.6.22. And it was _heavily_ tested. The above commit broke it
between 2.6.24-rc1 and 2.6.24-rc2, which is at least a regression.
Regards,
Holger
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
