Mike Almogy wrote:

> Hi.
>
> did you configured the kernel with IPCHAINS as needed ?
>
> You can read the IP-MASQUERADING HOWTO , there is a detailed examples how to
> do it.
> you need some rules in order to let Linux know that it supposed to do the
> masquerading from one net to the other.

Thanks for your answer, Mike,

For now no masquerading is taking place: all rules default to ACCEPT.

-- Meir

> ----- Original Message -----
> From: "Meir" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, June 15, 2000 12:20 PM
> Subject: SYN/ACK not forwarded to 2nd NIC
>
> > Hi,
> >
> > I have a curious problem.
> >
> > My box (linux) is trying to send mail to a target.
> > Between my box and the target there is a linux box 2.2.12
> > with 4 NICs but (for now) _without_ any filtering rules
> > at all (all default to ACCEPT).
> >
> > Only 2 NICs are up: eth0 to external net and eth1 to internal net.
> >
> > The problem is that when I tcpdump the 2 NICs from this middle-box,
> > I can see a SYN getting out from eth1 and then passed to eth0
> > (ip forwarding is enabled), and then I receive a SYN/ACK from the
> > target box via eth0, but this SYN/ACK _never_ reach
> > eth1 (which point to internal net) !!!
> >
> > The figure describe what's happen:
> >
> >                       ___________________
> >                      |                   |
> >        |   <- SYN    |<- SYN      <- SYN |          | 192.168.9.133
> > Target |             |eth0         eth1  |----------| My box
> >        |       192.168.0.29      192.168.9.150      | run
> >        |  SYN/ACK -> | ->  ???           |          | telnet Target 25
> >                      |_____________  ____|
> >
> >                                     ^
> >                                     |
> >                                     |_____ SYN/ACK never reach eth1 !!!
> >
> > # /sbin/route
> >
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags Metric Ref    Use
> > Iface
> > 192.168.0.29    *               255.255.255.255 UH    0      0        0
> > eth0
> > 192.168.9.150   *               255.255.255.255 UH    0      0        0
> > eth1
> > 192.168.0.24    *               255.255.255.248 U     0      0        0
> > eth0
> > 192.168.9.128   *               255.255.255.224 U     0      0        0
> > eth1
> > 127.0.0.0       *               255.0.0.0       U     0      0        0
> > lo
> > default         192.168.0.25    0.0.0.0         UG    0      0        0
> > eth0
> >
> > eth0: 192.168.0.29  netmask 255.255.255.248
> > eth1: 192.168.9.150 netmask 255.255.255.224
> > default route: 192.168.0.25
> >
> > My box: 192.168.9.133 netmask 255.255.255.224
> > default route: 192.168.9.150
> >
> > The same thing occures when telneting Target on ports 7/9/79 etc...
> >
> > _But_ when I telnet Target 80 or 21  from My Box, it works !
> > Why ?
> > Sure, I am missing something, but what ?
> >
> > I try with kernel 2.2.5, 2.2.12, 2.2.14.
> >
> > /proc/sys/net/ipv4/conf/{all,eth*}/rp_filter are set to 1
> > /proc/sys/net/ipv4/ip_forward                is  set to 1
> >
> > Thanks in advance,
> >
> > -- Meir
> >
> >
> > =================================================================
> > To unsubscribe, send mail to [EMAIL PROTECTED] with
> > the word "unsubscribe" in the message body, e.g., run the command
> > echo unsubscribe | mail [EMAIL PROTECTED]
> >
> >


=================================================================
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]

Reply via email to