Hi, I can tell you about the Intel ians driver: I set it up to do FEC (which doesn't yet give me any improved speed). This also does Fail-over very well. I guess that the intel drivers will also support what you want (ALB or one of the other modes). In any case you need to use ians.
Schlomo On Tue, 1 Jan 2002, Boris Kreitchman wrote: > > Hello, > > Does anyone have successful experience with implementing active/backup > setup with dual Intel EtherExpress Pro/100 ? Meaning when link goes down > on first interface IP will be transfered to second one. > > I tried bonding driver (/usr/src/linux/Documentation/networking/bonding.txt) > and while everything configured according to that mini-howto > (miimon=100 mode=1) nothing happends when active cable is disconnected. > > Driver from Intel's site reports when link goes up and down but I don't > see there an option to put it into active/backup mode. > > Kernel is 2.4.17. > > Regards, > Boris > > > > ================================================================= > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] > > -- Schlomo Schapiro Senior System Administrator MobilEye Vision Technologies Ltd. 24 Mishol Hadkalim St., Jerusalem, Israel Telephone: + 972-2-586-6989 Ext. 131 Mobile: + 972-55-767898 Fax: + 972-2-586-7720 email: [EMAIL PROTECTED] WWW: http://www.mobileye.com ================================================================= To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
